Preservation of threshold on-regime in amorphous semiconductor threshold switch
Authors:
- 1 January 1973
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 44 (1) , 341-346
Abstract
Chalcogenide amorphous threshold switching devices have been pulse switched and studied in the on‐regime by applying cw functions. A 1‐MHz square, sine, or triangular test wave of maximum amplitude ±7 V applied to a device which is then pulse switched (65, 30, or 10 V threshold), will cause the device to remain in the on‐regime after the set pulse turns off. Lowering the cw frequency or lowering the wave amplitude beneath critical values causes the specimen to turn off. At frequencies significantly above the turn‐off value, the positive and negative high‐current segments of the V‐I on‐regime curve are connected by a very high‐resistance essentially linear region passing through zero. The on‐regime can be preserved in this manner at ambient temperatures varying from at least −196 to + 150 °C; however, increasing ambient temperature causes a decrease in the turn‐off frequency. Decreasing the wave amplitude causes an increase in the turn‐off frequency.Keywords
This publication has 5 references indexed in Scilit:
- Nature of the on-state in chalcogenide glass threshold switchesJournal of Non-Crystalline Solids, 1972
- On the mechanism of ovonic threshold switchingSolid-State Electronics, 1971
- SIMPLE TEST FOR DOUBLE INJECTION INITIATION OF SWITCHINGApplied Physics Letters, 1970
- Ovonic threshold switching characteristicsJournal of Non-Crystalline Solids, 1970
- On state of chalcogenide glass switchesElectronics Letters, 1969