Enhanced Water Absorbency and Water Retention Rate for Superabsorbent Polymer via Porous Calcium Carbonate Crosslinking
Open Access
- 17 September 2023
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 13 (18) , 2575
Abstract
To improve the water absorbency and water-retention rate of superabsorbent materials, a porous calcium carbonate composite superabsorbent polymer (PCC/PAA) was prepared by copolymerization of acrylic acid and porous calcium carbonate prepared from ground calcium carbonate. The results showed that the binding energies of C–O and C=O in the O 1s profile of PCC/PAA had 0.2 eV and 0.1–0.7 eV redshifts, respectively, and the bonding of –COO− groups on the surface of the porous calcium carbonate led to an increase in the binding energy of O 1s. Furthermore, the porous calcium carbonate chelates with the –COO− group in acrylic acid through the surface Ca2+ site to form multidirectional crosslinking points, which would increase the flexibility of the crosslinking network and promote the formation of pores inside the PCC/PAA to improve the water storage space. The water absorbency of PCC/PAA with 2 wt% porous calcium carbonate in deionized water and 0.9 wt% NaCl water solution increased from 540 g/g and 60 g/g to 935 g/g and 80 g/g, respectively. In addition, since the chemical crosslinker N,N′-methylene bisacrylamide is used in the polymerization process of PCC/PAA, N,N′-methylene bisacrylamide and porous calcium carbonate enhance the stability of the PCC/PAA crosslinking network by double-crosslinking with a polyacrylic acid chain, resulting in the crosslinking network of PCC/PAA not being destroyed after water absorption saturation. Therefore, PCC/PAA with 2 wt% porous calcium carbonate improved the water-retention rate by 244% after 5 h at 60 °C, and the compressive strength was approximately five-times that of the superabsorbent without porous calcium carbonate.Keywords
Funding Information
- Guangxi Key R&D Program (GUIKEAB20238009, 22168011)
- National Natural Science Foundation of China (GUIKEAB20238009, 22168011)
This publication has 73 references indexed in Scilit:
- Tough superabsorbent poly(acrylic acid) nanocomposite physical hydrogels fabricated by a dually cross-linked single network strategyChinese Chemical Letters, 2016
- Superabsorbent nanocomposite based on methyl acrylic acid-modified bentonite and sodium polyacrylate: Fabrication, structure and water uptakeMaterials & Design, 2016
- Investigation of dynamic characteristics of nano-size calcium carbonate added in natural rubber vulcanizateComposites Part B: Engineering, 2014
- Effect of Cationic and Anionic Surfactants on the Application of Calcium Carbonate Nanoparticles in Paper CoatingACS Applied Materials & Interfaces, 2014
- Differentiating calcium carbonate polymorphs by surface analysis techniques—an XPS and TOF‐SIMS studySurface and Interface Analysis, 2008
- Preparation and Properties of Chitosan-g-poly(acrylic acid)/Montmorillonite Superabsorbent Nanocomposite via in Situ Intercalative PolymerizationIndustrial & Engineering Chemistry Research, 2007
- Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experimentEuropean Polymer Journal, 2006
- Polymer surface modification and characterization of particulate calcium carbonate fillersApplied Surface Science, 2003
- Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulateApplied Surface Science, 2003
- Mechano-chemical surface modification of calcium carbonate particles by polymer graftingPowder Technology, 2003