IFP Energies Nouvelles Approach for Dual Fuel Diesel-Gasoline Engines
Authors:
- 11 September 2011
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Compared to Spark Ignition (SI) engines, Compression Ignition (CI) engines are more efficient because of the higher compression ratios and leaner operation. However, thanks to stoichiometric air fuel ratio, SI engines allow efficient pollutants after treatment, particularly for NOx emissions. In this context, IFP Energies nouvelles (IFPEN) has developed the concept of diesel-gasoline combustion in order to combine the advantages of both fuels and both combustion processes.Focusing on a passenger car application, experiments have been performed using a modified DI turbocharged small diesel engine (the combustion chamber has been redesigned and port fuel injectors have been added). In-Cylinder Fuel Blending (ICFB) using port-fuel-injection of gasoline and optimized direct injection of diesel was used to control combustion phasing and duration. This modified engine can still run on diesel alone. ICFB mode is considered, either with a lean mixture, or at stoichiometric air-fuel ratio to perform NOx aftertreatment via a 3-way catalyst. The objective is to control the NOx emissions over the whole operating range of the engine, while maintaining attractive fuel efficiency.In this paper, IFP Energies nouvelles describes the main results of diesel-gasoline combustion, in order to understand what would be the best approach in terms of technological feasibility, fuel efficiency and pollutant emissions. The potential of the dual fuel concept has been investigated on several part load operating conditions, focused on a 2000 rpm engine speed. The operable range of load in ICFB combustion is extended from 7 to 16.5 bar IMEP. BSFC at part load is as low as that of a diesel engine. At higher load, NOx emissions are very low (≺0.5 g/kWh at 10 bar IMEP) and allow lean mixture operation until 14 bar IMEP. Outside of this ICFB operating range, the performance in full diesel mode remains totally acceptable.Keywords
This publication has 14 references indexed in Scilit:
- Extending the Operating Region of Multi-Cylinder Partially Premixed Combustion using High Octane Number FuelSAE International Journal of Advances and Current Practices in Mobility, 2011
- An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI CombustionSAE International Journal of Engines, 2010
- Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel BlendingSAE International Journal of Engines, 2009
- Combustion Characteristics of Dual-Fuel Diesel Engine Using Emulsified Bio-Fuel for Pilot IgnitionSAE International Journal of Advances and Current Practices in Mobility, 2009
- Effects of Fuel Property Changes on Heavy-Duty HCCI CombustionSAE International Journal of Advances and Current Practices in Mobility, 2007
- Dual-Fuel PCI Combustion Controlled by In-Cylinder Stratification of IgnitabilitySAE International Journal of Advances and Current Practices in Mobility, 2006
- Homogeneous Charge Combustion and Emissions of Ethanol Ignited by Pilot Diesel on Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2004
- Effects of EGR and Early Injection of Diesel Fuel on Combustion Characteristics and Exhaust Emissions in a Methane Dual Fuel EngineSAE International Journal of Advances and Current Practices in Mobility, 2002
- Low Emission and Knock-Free Combustion with Rich and Lean Biform Mixture in a Dual-Fuel CI Engine with Induced LPG as the Main FuelSAE International Journal of Advances and Current Practices in Mobility, 2001
- Controlling Combustion and Exhaust Emissions in a Direct-Injection Diesel Engine Dual-Fueled with Natural GasSAE International Journal of Advances and Current Practices in Mobility, 1995