Novel method for the measurement of liquid film thickness during fuel spray impingement on surfaces
Open Access
- 1 February 2016
- journal article
- research article
- Published by Optica Publishing Group in Optics Express
- Vol. 24 (3) , 2542-2561
Abstract
This paper describes the development and application of a novel optical technique for the measurement of liquid film thickness formed on surfaces during the impingement of automotive fuel sprays. The technique makes use of the change of the light scattering characteristics of a metal surface with known roughness, when liquid is deposited. Important advantages of the technique over previously established methods are the ability to measure the time-dependent spatial distribution of the liquid film without a need to add a fluorescent tracer to the liquid, while the measurement principle is not influenced by changes of the pressure and temperature of the liquid or the surrounding gas phase. Also, there is no need for non-fluorescing surrogate fuels. However, an in situ calibration of the dependence of signal intensity on liquid film thickness is required. The developed method can be applied to measure the time-dependent and two-dimensional distribution of the liquid fuel film thickness on the piston or the liner of gasoline direct injection (GDI) engines. The applicability of this technique was evaluated with impinging sprays of several linear alkanes and alcohols with different thermo-physical properties. The surface temperature of the impingement plate was controlled to simulate the range of piston surface temperatures inside a GDI engine. Two sets of liquid film thickness measurements were obtained. During the first set, the surface temperature of the plate was kept constant, while the spray of different fuels interacted with the surface. In the second set, the plate temperature was adjusted to match the boiling temperature of each fuel. In this way, the influence of the surface temperature on the liquid film created by the spray of different fuels and their evaporation characteristics could be demonstrated.Keywords
Funding Information
- Shell
This publication has 38 references indexed in Scilit:
- Surface and thickness measurement of a transparent film using wavelength scanning interferometryOptics Express, 2012
- Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number EmissionsEnergy & Fuels, 2012
- A thickness measurement technique based on low-coherence interferometry applied to a liquid film with thermal gradientExperimental Thermal and Fluid Science, 2010
- Fast surface measurement using wavelength scanning interferometry with compensation of environmental noiseApplied Optics, 2010
- Chemical characterization of particulate emissions from diesel engines: A reviewJournal of Aerosol Science, 2007
- Advanced gasoline engine development using optical diagnostics and numerical modelingProceedings of the Combustion Institute, 2007
- Spectrally resolved phase-shifting interferometry of transparent thin films: sensitivity of thickness measurementsApplied Optics, 2006
- High-speed imaging of OH* and soot temperature and concentration in a stratified-charge direct-injection gasoline engineProceedings of the Combustion Institute, 2005
- Thickness-profile measurement of transparent thin-film layers by white-light scanning interferometryApplied Optics, 1999
- Optical interferometry for measuring instantaneous thickness of transparent solid and liquid filmsReview of Scientific Instruments, 1988