The Study of Patterns and Mechanisms of Continuous Laser Ablation of Carbon Steel Rust Layers in Multi-Medium Environments
Open Access
- 10 June 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (12) , 5052
Abstract
A new multi-scenario, low-cost, high-efficiency, medium-assisted continuous laser cleaning of corrosion layers was developed. By comparing the roughness and cleaning depth of rust layers cleaned under conditions of liquid-assisted, solid-assisted, and mixed solid–liquid-assisted laser cleaning, simultaneously establishing a three-dimensional finite element model to study the variations during the cleaning process, and conducting a comparative analysis of the results of both, the cleaning mechanism is elucidated. The experimental results indicate that under conditions of water-assisted cleaning, the depth of rust layer increases initially and then decreases with varying water layer heights. The maximum cleaning depth is achieved at a water layer height of 0.1 mm, while the optimal surface roughness occurs at a water layer height of 0.2 mm, indicating a change in cleaning mechanism. The cleaning pattern with SiO2 activator assistance follows a similar trend to a water medium, reaching maximum cleaning depth at 0.1 mm height, with a slight improvement in surface roughness compared to water-assisted cleaning. Finally, solid–liquid mixing can achieve cleaning completion and improve surface roughness under conditions where water-assisted cleaning alone fails to reach a clean state. Therefore, the active agent can be used for laser cleaning to promote the cleaning process, and solid–liquid mixing to assist the laser cleaning can be a theoretical guide for the field of laser cleaning.Keywords
Funding Information
- Class III Peak Discipline of Shanghai—Materials Science and Engineering
This publication has 20 references indexed in Scilit:
- Fabrication of metal-based superhydrophilic and underwater superoleophobic surfaces by laser ablation and magnetron sputteringApplied Surface Science, 2023
- Continuous-wave-laser surface cleaning of high strength bolts: Analysis of bolt axial force lossStructures, 2023
- Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environmentsCeramics International, 2022
- Effect of the Medium on the Laser Ablation Characteristics of Aluminum Irradiated by Femtosecond Laser PulsesLasers in Manufacturing and Materials Processing, 2022
- Femtosecond laser ablation of Zn in air and ethanol: effect of fluence on the surface morphology, ablated area, ablation rate and hardnessApplied Physics A, 2021
- Simulation of nanosecond laser cleaning the paint based on the thermal stressOptik, 2021
- The influence of nanosecond laser pulse energy density for paint removalOptik, 2018
- Slurry components in metal chemical mechanical planarization (CMP) process: A reviewInternational Journal of Precision Engineering and Manufacturing, 2016
- Liquid-assisted laser ablation of advanced ceramics and glass-ceramic materialsApplied Surface Science, 2016
- Effect of non-spherical colloidal silica particles on removal rate in oxide CMPInternational Journal of Precision Engineering and Manufacturing, 2015