Multifunctional performance of ceramic reinforced magnesium metal matrix composites through microstructural engineering and thermal analysis
Authors:
- 16 November 2026
- journal article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
Abstract
This research analysis the effect of zirconium nitride (ZrN) reinforcement on the mechanical, tribological, microstructural, and thermophysical characteristics of the AZ80 magnesium alloy-based metal matrix composite. The composites made with 0, 3, 6, and 9 wt.% ZrN were analyzed by scanning electron microscopy (SEM), energy-dispersive spectroscopy, mechanical testing, dry sliding wear testing, and laser flash analysis (LFA). The hardness, flexural strength, tensile strength, yield strength of the composites progressively increased with increasing ZrN content, whereas elongation decreased. The hardness and ultimate tensile strength values at 9 wt. % ZrN were 110 ± 4 VHN and 305 ± 8 MPa, respectively, which are higher than those obtained for the unreinforced alloy (68 ± 2 VHN and 210 ± 5 MPa). The wear rate and coefficient of friction were also significantly reduced to 2.1 × 10 −6 mm 3 /N·m and 0.31, respectively, at a load of 10 N. Microstructure analysis showed that with the increase in ZrN content, there was an improvement in the distribution of the reinforcements and the interaction between the matrix and the particles. The proposed model has a lower error rate, with an Mean Squared Error (MSE) of 0.02, an Mean Absolute Error (MAE) of 0.04, and an Root Mean Square Error (RMSE) of 0.08. The results show that AZ80 composites reinforced with ZrN are promising materials for lightweight structural applications where improved strength and wear resistance are required.This publication has 29 references indexed in Scilit:
- The Impact of Sn Additions on Microstructure, Hardness and Wear Behavior of the As-Cast AZ41 Magnesium AlloyInternational Journal of Metalcasting, 2025
- Exact solutions of thermal response in pulsed laser heating under transient Dirichlet conditions with Beer–Lambert absorption modelInternational Journal of Advances in Engineering Sciences and Applied Mathematics, 2025
- Vacuum Die Casting Process and Microstructure/Mechanical Characteristics Study of Magnesium Alloy Composite Hybridize with Zirconium Dioxide and Silicon NitrideInternational Journal of Metalcasting, 2025
- Mechanical-Tribo-Philosophies of Advanced Stir-Casted Al-7075(T6)-Based Hybrid Composite Embedded with Si3N4 + MoS2 and TiB2 + MoS2: A Neoteric Comparative ExperimentationJournal of Materials Engineering and Performance, 2025
- Lightweight composite materials in automotive engineering: State-of-the-art and future trendsAlexandria Engineering Journal, 2025
- Enhancement of Material Properties of AZ80 Mg Alloy Processed by Combined Severe Plastic DeformationJournal of Bio- and Tribo-Corrosion, 2024
- Advancing the next generation of high-performance metal matrix composites through metal particle reinforcementAdvanced Composites and Hybrid Materials, 2024
- Development AA7075/SiC/ZrN hybrid composite fabricated through powder metallurgy techniques and evolution its microstructural and mechanical propertiesInteractions, 2024
- Advancements in Aluminum Matrix Composites: A Comprehensive Review on the Mechanical and Microstructural Attributes of Rare Earth Elements (REEs) and Rare Earth Oxides (REOs) Doped MaterialsTransactions of the Indian Institute of Metals, 2024
- Parametric study on the dry sliding wear behaviour of AA6082–T6/TiB2 in situ composites using response surface methodologyJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2018