Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material
Authors:
- 4 April 2025
- journal article
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (22) , e202500939
Abstract
Manganese‐based layer‐structured oxide materials are considered as one of the most competitive cathode materials for sodium‐ion batteries due to their low cost and efficient sodium intercalation chemistry. Their electrochemical performance, however, is hindered by mechanical and chemical failures stemming from weak interlayer interactions, the Jahn–Teller effect of Mn 3+ and unstable surfaces. To address these issues, a quenching method was employed to fabricate a robust multiphase structure with a fluorine and dislocation‐rich surface. Through the accumulation of dislocations and the interlocking of multiphase structures, the mechanical stability of the material during (de)sodiation processes is enhanced, while the surface fluorine anchoring further strengthens the chemical stability. Even after 200 cycles at 0.5 C and 1 C within the voltage range of 1.5–4.5 V, the designed composite material P2/P3/O3‐Na 0.89 Ni 0.3 Mn 0.55 Cu 0.1 Ti 0.05 O 1.94 F 0.06 exhibits impressive capacity retention rates of 87.17% and 90.4%, respectively. This work exemplifies the important role of simultaneous design of mechano‐chemically coupled materials for the development of high performances cathode materials.Keywords
Funding Information
- National Natural Science Foundation of China (52272194)
This publication has 78 references indexed in Scilit:
- Multiphase Riveting Structure for High Power and Long Lifespan Potassium‐Ion BatteriesAdvanced Functional Materials, 2024
- High Cycling Rate‐Induced Irreversible TMO6 Slabs Glide in Co‐Free High‐Ni Layered Cathode MaterialsAdvanced Functional Materials, 2023
- Unravelling the Nature of the Intrinsic Complex Structure of Binary‐Phase Na‐Layered OxidesAdvanced Materials, 2022
- Manipulating the Local Electronic Structure in Li‐Rich Layered Cathode Towards Superior Electrochemical PerformanceAdvanced Functional Materials, 2021
- Decoupling the Voltage Hysteresis of Li‐Rich Cathodes: Electrochemical Monitoring, Modulation Anionic Redox Chemistry and Theoretical VerifyingAdvanced Functional Materials, 2020
- Inducing Favorable Cation Antisite by Doping Halogen in Ni‐Rich Layered Cathode with Ultrahigh StabilityAdvanced Science, 2018
- High Energy Density Sodium‐Ion Battery with Industrially Feasible and Air‐Stable O3‐Type Layered Oxide CathodeAdvanced Energy Materials, 2017
- Cubic Perovskite Fluoride as Open Framework Cathode for Na‐Ion BatteriesAdvanced Functional Materials, 2017
- Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion BatteriesAdvanced Materials, 2017
- Layered P2/O3 Intergrowth Cathode: Toward High Power Na‐Ion BatteriesAdvanced Energy Materials, 2014