Thermal management and design optimization for ultrahigh-temperature–pressure experiments in multi-anvil presses
- 1 April 2026
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (4)
Abstract
The simultaneous generation of ultrahigh pressure and temperature in a multi-anvil press is crucial for studying planetary interiors and synthesizing novel materials. However, this goal is fundamentally challenged by severe thermal losses for the small sample-cell assembly, especially at ultrahigh pressures above 40 GPa. Our study employs a coupled thermal-electrical finite element model, validated by experimental data, to investigate the principles for enhancing the temperature generation capacity of an ultrahigh-pressure assembly. Our finite element model well reproduces the experimental heating results at ultrahigh pressures. The simulation analysis demonstrates the radial alumina insulation sleeve as the most significant factor for improving heating efficiency, while enlarging the diameter of the titanium carbide electrode is critical for enhancing interfacial stability. Counterintuitively, the adoption of high-thermal-conductivity sintered diamond anvils, while demanding more power, serves as an essential safety mechanism by preventing the melting of sintered diamond anvil truncations through the efficient heat dissipation. The combined optimization of these factors alleviates previous thermal bottlenecks and allows the assembly to reach noticeably higher temperatures (∼4000 K). This work thereby provides a rational framework and practical strategies for achieving more extreme ultrahigh temperature conditions at ultrahigh pressures through integrated thermal management.Keywords
Funding Information
- Major Research Plan (9257920029)
- National Natural Science Foundation of China (42272041)
- Jilin Province Major Science and Technology Program of China (No.20240211002GX)
This publication has 18 references indexed in Scilit:
- A virtual thermometer for ultrahigh-temperature–pressure experiments in a large-volume pressMatter and Radiation at Extremes, 2024
- A simplified rapid-quench multi-anvil techniqueReview of Scientific Instruments, 2021
- Simultaneous generation of ultrahigh pressure and temperature to 50 GPa and 3300 K in multi-anvil apparatusReview of Scientific Instruments, 2021
- Machinable boron-doped diamond as a practical heating element in multi-anvil apparatusesReview of Scientific Instruments, 2021
- A rapid-quench technique for multi-anvil high-pressure-temperature experimentsReview of Scientific Instruments, 2020
- High-pressure generation in the Kawai-type multianvil apparatus equipped with tungsten-carbide anvils and sintered-diamond anvils, and X-ray observation on CaSnO3 and (Mg,Fe)SiO3Comptes Rendus. Géoscience, 2018
- Synthesis of boron-doped diamond and its application as a heating material in a multi-anvil high-pressure apparatusReview of Scientific Instruments, 2017
- Semiconductor diamond heater in the Kawai multianvil apparatus: an innovation to generate the lower mantle geothermHigh Pressure Research, 2014
- Ultrahard polycrystalline diamond from graphiteNature, 2003
- Thermal conductivity of corundum and periclase and implications for the lower mantleJournal of Geophysical Research, 1997