The Synergetic Role of Pores and Grooves of the Pad on the Scratch Formation during STI CMP
- 1 January 2010
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (8) , H806-H809
Abstract
The polishing pad plays a vital role in achieving the desired removal rates and level of surface planarity during the chemical mechanical planarization (CMP) process. Generally the pad containing both pores and grooves is used for the shallow trench isolation (STI) CMP process. After polishing the wafer, many scratches would be produced on the surface, especially chatter mark scratches on the oxide surface. In this work, the role of pores and grooves of the pad on scratch formation was studied with STI-patterned wafers with three types of pads: pad with only pores, pad with only grooves, and pad with both grooves and pores. The pad with only grooves produced more irregular-shaped scratches when compared to the pad with only pores, but the length of the scratch was smaller. A regular chatter mark type scratch would be formed only when the pad contained both pores and grooves. The most likely occurring phenomenon might be the stick-slip motion during the process. The removal rates with three different pads were compared and they were inversely correlated to each other. The presence of pores would be essential to decrease the scratch number. However the scratch number could be greatly reduced with the combination of both pores and grooves. Overall, the number of scratches would be greater with the absence of pores, and the scratch number and intensity substantially reduced with the combination of both pores and grooves.Keywords
This publication has 32 references indexed in Scilit:
- Pad roughness variation and its effect on material removal profile in ceria-based CMP slurryJournal of Materials Processing Technology, 2008
- Effects of pad properties on material removal in chemical mechanical polishingJournal of Materials Processing Technology, 2007
- Investigation of polishing characteristics of shallow trench isolation chemical mechanical planarization with different types of slurriesMicroelectronic Engineering, 2007
- Brittle and Ductile Fracture Mechanics Analysis of Surface Damage Caused During CMPJournal of the Electrochemical Society, 2007
- Surface-modified polymeric pads for enhanced performance during chemical mechanical planarizationThin Solid Films, 2005
- Impact of Novel Pad Groove Designs on Removal Rate and Uniformity of Dielectric and Copper CMPJournal of the Electrochemical Society, 2004
- Slip process of stick–slip motion in the scratching of a polymerMaterials Science and Engineering: A, 2003
- Quantitative analysis of physical and chemical changes in CMP polyurethane pad surfacesMaterials Characterization, 2002
- Pad conditioning in chemical mechanical polishingJournal of Materials Processing Technology, 2002
- Pad porosity, compressibility and slurry delivery effects in chemical-mechanical planarization: modeling and experimentsThin Solid Films, 2000