A Study on the Failure Mechanism and Enhanced Reliability of Sn58Bi Solder Anisotropic Conductive Film Joints in a Pressure Cooker Test Due to Polymer Viscoelastic Properties and Hydroswelling
Authors:
- 21 January 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 6 (2) , 216-223
Abstract
A study of the failure mechanism and the enhanced reliability performance of SnBi58 solder ACF joints were investigated by considering the total influence of polymer viscoelastic and hygroscopic properties on the cross-sectional morphologies and the electrical properties of Sn58Bi solder joints in a pressure cooker test (PCT) for 120 h. The Sn58Bi solder failure mechanism is demonstrated that, when polymer resin absorbed moisture, the Tg values of polymer resins decreased, and the coefficient of thermal expansion (CTE) values of polymer resins increased, due to a hydroswelling effect. Considering the total influence of polymer viscoelastic and hygroscopic properties on the cross-sectional morphologies and the reliability of Sn58Bi solder joints in a PCT for 120 h, four typical polymer resins were evaluated. As a result, cationic epoxy (128 ppm/°C) with the smallest CTE mismatch (112 ppm/°C) with SnBi58 solder joints (16 ppm/°C) in a PCT aging test (121°C, 100% humidity, and 2 atm) showed a stable electrical property in terms of joint contact resistance and remained a complete cross-sectional Sn58Bi solder joint morphology after PCT reliability for 120 h.Keywords
This publication has 12 references indexed in Scilit:
- A Study on the Solder Ball Size and Content Effects of Solder ACFs for Flex-on-Board Assembly Applications Using Ultrasonic BondingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Flux function added solder anisotropic conductive films (ACFs) for high power and fine pitch assemblies2013
- Applications of FTIR on Epoxy Resins - Identification, Monitoring the Curing Process, Phase Separation and Water Uptake2012
- High Power and High Reliability Flex-On-Board Assembly Using Solder Anisotropic Conductive Films Combined With Ultrasonic Bonding TechniqueIEEE Transactions on Components, Packaging and Manufacturing Technology, 2011
- Fine Pitch Compliant Bump Interconnection for Flip chip on Flexible Display Packaging by Anisotropic Conductive Film2007
- Lead‐free Electronics2006
- Moisture-induced failures of adhesive flip chip interconnectsIEEE Transactions on Components and Packaging Technologies, 2005
- High-density interconnections in mobile phones using ACF2005
- A reliable and environmentally friendly packaging technology-flip chip joining using anisotropically conductive adhesive2002
- Cationic polymerization of diglycidly ether of bisphenol a resins initiated by benzylsulfonium saltsPolymer Composites, 1997