Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending
Authors:
Open Access
- 27 November 2023
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (2) , 798-816
Abstract
Carboxylated cellulose nanocrystals (cCNCs) were blended with high‐quality commercial latex to enhance key pressure‐sensitive adhesive (PSA) properties: tack, peel strength, and shear adhesion. Initially, a 25–1 fractional factorial design was used to evaluate the effect of five factors: cCNC type (never‐dried vs. dried re‐dispersed), the use of sonication to disperse the cCNC, cCNC loading, blend temperature, and mixing speed. The regression analysis identified optimal blend conditions and the three most significant factors. It was found that increasing mixing speed had the strongest positive impact on all three PSA properties. A subsequent design of experiments looked at using a different mixing system—a homogenizer—and the data were viewed relative to the mixing power. Further increase in mixing beyond the original design framework led to increase in shear adhesion but decreased tack and peel strength. Nevertheless, in all cases, the PSA properties of the blended latexes exceeded that of the base‐case latex without cCNCs. The second factor of importance was the cCNC loading. The blending of cCNCs at levels beginning at 0.5 phm (parts per hundred parts monomer) led to the simultaneous improvement in all three PSA properties compared to the base‐case latex. The 1 phm level appeared to provide the best impact on the PSA properties. Finally, the need to sonicate the cCNCs dispersions before blending was significant. The results were further supported by rheological measurements, which demonstrated significant increase in viscosity with cCNC addition. This study clearly demonstrates the effectiveness of cCNC blending to improve all PSA properties simultaneously and provides practical insights for industrial‐scale application.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (#ALLRP 560215‐20)
This publication has 45 references indexed in Scilit:
- Cellulose nanomaterials review: structure, properties and nanocompositesChemical Society Reviews, 2011
- Imidazolium grafted cellulose nanocrystals for ion exchange applicationsChemical Communications, 2011
- Manipulating Latex Polymer Microstructure Using Chain Transfer Agent and Cross‐Linker to Modify PSA Performance and ViscoelasticityMacromolecular Reaction Engineering, 2011
- Design of Nanostructured Waterborne Adhesives with Improved Shear ResistanceMacromolecular Materials and Engineering, 2010
- Manipulation of chain transfer agent and cross-linker concentration to modify latex micro-structure for pressure-sensitive adhesivesEuropean Polymer Journal, 2010
- Soft polymer and nano-clay supracolloidal particles in adhesives: synergistic effects on mechanical propertiesSoft Matter, 2009
- Waterborne, Nanocomposite Pressure‐Sensitive Adhesives with High Tack Energy, Optical Transparency, and Electrical ConductivityAdvanced Materials, 2006
- Pressure-Sensitive Adhesives: An Introductory CourseMRS Bulletin, 2003
- Tensile behavior of nanocomposites from latex and cellulose whiskersPolymer Composites, 1996
- Adhesion and Cleavage Stress at Interfaces Between Solids and a Pressure-Sensitive Adhesive1964