Crevice Corrosion of Alloy 625 in Natural Seawater
Authors:
- 1 June 2003
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 59 (6) , 498-504
Abstract
An experimental study was conducted to determine the influence of temperature on crevice corrosion initiation for Alloy 625 (UNS N06625) in natural seawater. These tests showed that there was a critical potential-temperature-time relationship needed to initiate crevice corrosion. The potential necessary to cause crevice corrosion on Alloy 625 decreased (became less noble) when the temperature was increased from ambient to 40°C. The crevice initiation potential decreased from 300 mV for ambient temperature seawater to 100 mV for 40°C seawater. Crevice initiation potentials were essentially unchanged between 40°C and 65°C, while the time required to initiate crevice corrosion decreased as temperature increased. In a second aspect of this work, natural seawater exposure studies were conducted to determine if there is a mechanistic connection between ennoblement (the gradual elevation of corrosion potential that occurs during long-term continuous immersion in natural seawater) and crevice corrosion initiation. It was found that ennoblement produced corrosion potentials that exceed the crevice corrosion initiation potential in ambient temperature natural seawater. At 65°C, the open-circuit potential did not exceed the crevice initiation potential. However, temperature transients from ambient to elevated temperature created temporary conditions where the corrosion potential was substantially higher than the crevice initiation potential if ennoblement had previously occurred at ambient temperatures.Keywords
This publication has 22 references indexed in Scilit:
- Experimental procedure for crevice corrosion studies of Ni–Cr–Mo alloys in natural seawaterReview of Scientific Instruments, 2002
- The ennoblement of stainless steels in seawater: a likely explanation coming from the fieldCorrosion Science, 1998
- Comparative study of stainless steel and related alloy corrosion in natural sea waterBritish Corrosion Journal, 1998
- An assessment of the corrosion behaviour of high-grade alloys in seawater at elevated temperature and under a high velocity impinging flowCorrosion Science, 1996
- Role of microfouling organisms in marine corrosion†Biofouling, 1993
- Test techniques for pitting and crevice corrosion resistance of stainless steels and nickel-base alloys in chloride-containing environmentsInternational Materials Reviews, 1987
- The influence of marine aerobic microbial film on stainless steel corrosion behaviourCorrosion Science, 1985
- New Technique for Predicting the Performance of Stainless Steels in Sea Water and other Chloride-containing EnvironmentsBritish Corrosion Journal, 1980
- Crevice Corrosion of Stainless Steels: II. Experimental studiesBritish Corrosion Journal, 1978
- Crevice Corrosion of Stainless Steels: I. A Mathematical ModelBritish Corrosion Journal, 1978