Numerical Prediction of Cyclic Variability in a Spark Ignition Engine Using a Parallel Large Eddy Simulation Approach
Open Access
- 29 March 2018
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 140 (5)
Abstract
Cycle-to-cycle variability (CCV) is detrimental to IC engine operation and can lead to partial burn, misfire, and knock. Predicting CCV numerically is extremely challenging due to two key reasons. First, high-fidelity methods such as large eddy simulation (LES) are required to accurately resolve the in-cylinder turbulent flow field both spatially and temporally. Second, CCV is experienced over long timescales and hence the simulations need to be performed for hundreds of consecutive cycles. Ameen et al. (2017, “Parallel Methodology to Capture Cyclic Variability in Motored Engines,” Int. J. Engine Res., 18(4), pp. 366–377.) developed a parallel perturbation model (PPM) approach to dissociate this long time-scale problem into several shorter time-scale problems. This strategy was demonstrated for motored engine and it was shown that the mean and variance of the in-cylinder flow field was captured reasonably well by this approach. In the present study, this PPM approach is extended to simulate the CCV in a fired port-fuel injected (PFI) spark ignition (SI) engine. The predictions from this approach are also shown to be similar to the consecutive LES cycles. It is shown that the parallel approach is able to predict the coefficient of variation (COV) of the in-cylinder pressure and burn rate-related parameters with sufficient accuracy, and is also able to predict the qualitative trends in CCV with changing operating conditions. It is shown that this new approach is able to give accurate predictions of the CCV in fired engines in less than one-tenth of the time required for the conventional approach of simulating consecutive engine cycles.Keywords
Funding Information
- Office of Energy Efficiency and Renewable Energy (DE-AC02-06CH11357)
This publication has 26 references indexed in Scilit:
- Cluster-based analysis of cycle-to-cycle variations: application to internal combustion enginesExperiments in Fluids, 2014
- Direct numerical simulation of multiple cycles in a valve/piston assemblyPhysics of Fluids, 2014
- RANS and Large Eddy Simulation of Internal Combustion Engine Flows—A Comparative StudyJournal of Engineering for Gas Turbines and Power, 2014
- Grid-Convergent Spray Models for Internal Combustion Engine Computational Fluid Dynamics SimulationsJournal of Energy Resources Technology, 2013
- Investigation of the 3D flow field in an IC engine using tomographic PIVProceedings of the Combustion Institute, 2013
- Spatio-temporal structure and cycle to cycle variations of an in-cylinder tumbling flowExperiments in Fluids, 2010
- Large Eddy Simulation of a Motored Single-Cylinder Piston Engine: Numerical Strategies and ValidationFlow, Turbulence and Combustion, 2010
- Analysis of cyclic variations of liquid fuel–air mixing processes in a realistic DISI IC-engine using Large Eddy SimulationInternational Journal of Heat and Fluid Flow, 2010
- Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LESCombustion and Flame, 2009
- Large eddy simulation based analysis of the effects of cycle-to-cycle variations on air–fuel mixing in realistic DISI IC-enginesProceedings of the Combustion Institute, 2009