Flatness-based trajectory planning for a quadrotor Unmanned Aerial Vehicle test-bed considering actuator and system constraints
Authors:
- 1 June 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 920-925
Abstract
This work proposes a flatness-based trajectory planning for a quadrotor Unmanned Aerial Vehicle (UAV) system. The objective is to drive the system as fast as possible from an initial position to a final position without violating system constraints. These constraints can be the actuator limits or the maximal allowable pitch and roll angles. By deriving the extrema of the nominal control inputs to be applied along the reference trajectories as well as the nominal angles that the system will achieve, the solutions to the trajectory planning are obtained by using simple equations. The proposed approach is applied to the quadrotor UAV test-bed of the Networked Autonomous Vehicles (NAV) Laboratory of Concordia University where sliding mode controller and linear quadratic regulator are implemented, tested and compared.Keywords
This publication has 8 references indexed in Scilit:
- Flatness-Based Trajectory Planning/Replanning for a Quadrotor Unmanned Aerial VehicleIEEE Transactions on Aerospace and Electronic Systems, 2012
- Cooperative Path Planning of Unmanned Aerial Vehicles2010
- Adaptive path planning for VTOL-UAVsIEEE Aerospace and Electronic Systems Magazine, 2009
- Trajectory planning for a quadrotor helicopter2008
- Time-Optimal Control of a Hovering Quad-Rotor HelicopterJournal of Intelligent & Robotic Systems, 2006
- Sliding Mode Control of a Quadrotor Helicopter2006
- Control of linear systems subject to input constraints: a polynomial approachAutomatica, 2001
- Flatness and defect of non-linear systems: introductory theory and examplesInternational Journal of Control, 1995