Current‐Corrected Cycling Strategies for True Electrode Performance Measurement
- 1 December 2021
- journal article
- research article
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (2)
Abstract
In battery research, galvanostatic cycling is the most widely used strategy to evaluate electrode performance. By applying pre‐set current throughout the test, this method often fails to accurately reflect electrode performance at the designed cycling rate (particularly for high‐rate cycling) because the actual capacity can be considerably affected by polarization and electrode degradation. To address this issue, a current‐corrected cycling method is proposed, in which the current is actively adjusted during cycling based on the measured capacity of previous cycles. Compared to the traditional method, which may result in cycling rates that are hundreds of times faster than the designed rate, the proposed cycling strategy can effectively measure rate‐dependent electrode performance precisely at designated rates. The authors believe this method is highly useful in electrode/battery performance evaluation for practical cell design, particularly in fast‐charging applications.Keywords
This publication has 19 references indexed in Scilit:
- Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteriesJournal of Materials Chemistry A, 2019
- Mechanofusion-derived Si-alloy/graphite composite electrode materials for Li-ion batteriesJournal of Materials Chemistry A, 2019
- Updating the Structure and Electrochemistry of LixNiO2 for 0 ≤ x ≤ 1Journal of the Electrochemical Society, 2018
- Kinetically Determined Phase Transition from Stage II (LiC12) to Stage I (LiC6) in a Graphite Anode for Li-Ion BatteriesThe Journal of Physical Chemistry Letters, 2018
- The Effect of Different Li(Ni1-x-yMnxCoy)O2Positive Electrode Materials and Coatings on Parasitic Heat Flow as Measured by Isothermal Microcalorimetry, Ultra-High Precision Coulometry and Long Term CyclingJournal of the Electrochemical Society, 2017
- State-of-charge and state-of-health estimation for lithium-ion batteries based on dynamic impedance techniqueJournal of Power Sources, 2014
- Opportunities and challenges for a sustainable energy futureNature, 2012
- High-capacity Si–graphite composite electrodes with a self-formed porous structure by a partially neutralized polyacrylate for Li-ion batteriesEnergy & Environmental Science, 2012
- Rechargeable batteries: challenges old and newJournal of Solid State Electrochemistry, 2012
- Electrochemical Energy Storage for Green GridChemical Reviews, 2011