Catalytic Decomposition of Ammonia for Hydrogen Production over Carbon Nanofiber Supported Fe and Mo Catalysts in a Microwave Heated Reactor
Authors:
- Melih GulerMGMelih Guler
- Cansu KorkusuzCKCansu Korkusuz
- Dilek VarisliDVDilek Varisli
- 16 March 2019
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 17 (6)
Abstract
Microwave heated reactor which was loaded with carbon fiber supported iron and molybdenum incorporated monometallic catalysts was used to produce COx free hydrogen from ammonia. Impregnation procedure was applied to synthesize the catalysts at different metal loading (4–14 wt % according to ICP-OES) using iron nitrate or ammonium molybdate and reaction tests were carried out under the flow of pure ammonia (GHSV: 36,000 ml/hgcat). Activities of molybdenum incorporated carbon fiber catalyts are found to be lower than that of the iron loaded ones in the conventional reaction system. The effect of metal loading was clealy seen in the activity of molybdenum incorporated catalyst, unlike iron incorporated catalyts, especially under high reaction temperature conditions. Catalysts showed greatly enhanced activities in microwave heated system in comparison to conventionally heated reactor system. Complete conversion of ammonia was achieved at 500 °C by using molybdenum incorporated catalysts and at 450 °C by using iron incorporated catalysts (with GHSV of 36,000 ml/hgcat) in microwave heated reactor system. Transfer of energy directly to the active species and formation of carbide species, Fe2C or Mo2C, during the reaction under microwave application could be considered as the major factors leading to a better ammonia conversion. Structural properties of carbon support materials, such as the surface area, could be effective on the activity of the catalysts via the distribution of active species, however, this would be more pronounced effect in conventional system.Keywords
This publication has 49 references indexed in Scilit:
- Iron-containing SBA-15 as catalyst for partial oxidation of hydrogen sulfideCatalysis Today, 2013
- Experimental and Theoretical Investigation of Molybdenum Carbide and Nitride as Catalysts for Ammonia DecompositionJournal of the American Chemical Society, 2013
- Microwave-activated methanol steam reforming for hydrogen productionInternational Journal of Hydrogen Energy, 2011
- Hierarchical Dendrite-Like Magnetic Materials of Fe3O4, γ-Fe2O3, and Fe with High Performance of Microwave AbsorptionChemistry of Materials, 2011
- A comparative study for simultaneous removal of urea, ammonia and carbon dioxide from industrial wastewater using a thermal hydrolyserChemical Engineering Journal, 2010
- NH3 adsorption and dissociation on a nanosized iron clusterInternational Journal of Hydrogen Energy, 2010
- Decomposition kinetics of ammonia in gaseous stream by a nanoscale copper-cerium bimetallic catalystJournal of Hazardous Materials, 2008
- Microwave-assisted catalytic decomposition of methane over activated carbon for CO2CO2-free hydrogen productionInternational Journal of Hydrogen Energy, 2007
- Commercial Fe‐ or Co‐Containing Carbon Nanotubes as Catalysts for NH3 Decomposition.ChemInform, 2007
- Study of the thermal repartition in a microwave reactor: application to the nitrobenzene hydrogenationChemical Engineering and Processing - Process Intensification, 2004