Characterization of Aluminium Single-Lap Joints for High Temperature Applications
- 12 November 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 730-732, 721-726
Abstract
In this study, an experimental investigation into the shear strength behaviour of aluminium alloy single-lap adhesive joints was carried out in order to understand the effect of temperature on the strength of adhesively bonding joints. Single lap joints (SLJs) were fabricated and tested at RT and high temperatures (100°C, 125°C, 150°C, 175°C and 200°C). Results showed that the failure loads of the single-lap joint test specimens vary with temperature and this needs to be considered in any design procedure. It is shown that, although the tensile stress decreased with temperature, the lap-shear strength of the adhesive increased with increasing of temperature up to the glass transition of the adhesive (Tg) and decreased for tests above the Tg.Keywords
This publication has 10 references indexed in Scilit:
- Effects of Temperature and Loading Rate on the Mechanical Properties of a High Temperature Epoxy AdhesiveJournal of Adhesion Science and Technology, 2011
- Static and fatigue behaviour of room temperature vulcanising silicone adhesives for high temperature aerospace applicationsMaterialwissenschaft und Werkstofftechnik, 2010
- The effect of temperature on the mechanical properties of adhesives for the automotive industryProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2010
- Experimental and numerical analysis of single-lap joints for the automotive industryInternational Journal of Adhesion and Adhesives, 2009
- Mechanical Characterization of Flexible AdhesivesThe Journal of Adhesion, 2009
- Adhesively bonded joints in composite materials: An overviewProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2009
- Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperaturesJournal of Adhesion Science and Technology, 2005
- Manufacture of adhesive joints and bulk specimens with high-temperature adhesivesInternational Journal of Adhesion and Adhesives, 2004
- Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints II. ExperimentalInternational Journal of Adhesion and Adhesives, 2000
- The effect of temperature on the strength of adhesive jointsInternational Journal of Adhesion and Adhesives, 1992