Quenching effects for piezoelectric properties on lead-free (Bi1/2Na1/2)TiO3ceramics
Authors:
- 21 September 2016
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (10S) , 10TB07
Abstract
Lead-free ferroelectric and piezoelectric ceramics, (Bi0.5Na0.5)TiO3(BNT), were fabricated by a quenching procedure after sintering, and then their electrical properties were investigated with the aim to increase their depolarization temperatureTd. From the measurement of the temperature dependence of dielectric properties,Tdincreased with increasing quench temperature. TheTdof a BNT sample quenched from 1100 °C was 223 °C, which was almost 50 °C higher than that prepared by the ordinary cooling process. From the measurement ofP–Ehysteresis loops, both the remanent polarizationPrand the coercive fieldEcof BNT samples prepared by ordinary firing were almost the same as those quenched from 1100 °C. Additionally, from the measurements by a resonance–antiresonance method, the electromechanical coupling factork33of ordinarily fired BNT was 0.45, and that of the quenched BNT was 0.46. From these results, it is clarified that the quenching procedure is an effective way to increase theTdof BNT ceramics without deteriorating ferroelectric and piezoelectric properties.Keywords
This publication has 34 references indexed in Scilit:
- Thermal depoling process and piezoelectric properties of bismuth sodium titanate ceramicsJournal of Applied Physics, 2009
- High-Performance Bi0.5Na0.5TiO3 Single Crystals Grown by High-Oxygen-Pressure Flux MethodJapanese Journal of Applied Physics, 2008
- Barium Titanate Piezoelectric Ceramics Manufactured by Two-Step SinteringJapanese Journal of Applied Physics, 2007
- Piezoelectric Properties of BaTiO3 Ceramics with High Performance Fabricated by Microwave SinteringJapanese Journal of Applied Physics, 2006
- Preparation of BaTiO3 Thick Films by Inkjet Printing on Oxygen-Plasma-Modified SubstratesJapanese Journal of Applied Physics, 2006
- Large Piezoelectric Constant and High Curie Temperature of Lead-Free Piezoelectric Ceramic Ternary System Based on Bismuth Sodium Titanate-Bismuth Potassium Titanate-Barium Titanate near the Morphotropic Phase BoundaryJapanese Journal of Applied Physics, 2003
- Dielectric and Piezoelectric Properties of (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3 SystemsJapanese Journal of Applied Physics, 1999
- Ferroelectric Properties of the PbZrO3–PbTiO3 SystemJapanese Journal of Applied Physics, 1996
- (Bi1/2Na1/2)TiO3-BaTiO3 System for Lead-Free Piezoelectric CeramicsJapanese Journal of Applied Physics, 1991
- Piezoelectric Properties of Lead Zirconate-Lead Titanate Solid-Solution CeramicsJournal of Applied Physics, 1954