A new torsional vibration coupling model for transmission system in diesel generator
Authors:
Open Access
- 29 December 2021
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 24 (3) , 919-933
Abstract
The coupling between the crankshaft and the camshaft is neglected before in fault diagnosis which may lead to incomplete fault information. In this paper, a new torsional coupling model of a diesel generator transmission system is proposed for fault diagnosis. The natural frequency and forced torsional vibration response of the model are obtained by the system matrix method and Newmark-β method. For the system without considering the lumped mass of camshafts, some key natural frequencies are lost. The vibration dynamics are compared for the transmission system with and without the new coupling model. And important frequency responses are missed in the spectrums of the forced torsional vibration without the new coupling model. Finally, the new coupling model is implemented in fault diagnosis and the cause of an unusual vibration fault is deduced in the simulation, which confirms the feasibility of the proposed model in fault diagnosis.Keywords
Funding Information
- National Natural Science Foundation of China (51805106)
This publication has 34 references indexed in Scilit:
- Natural roller bearing fault detection by angular measurement of true instantaneous angular speedMechanical Systems and Signal Processing, 2010
- Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaftMechanical Systems and Signal Processing, 2010
- Autoregressive model-based gear shaft fault diagnosis using the Kolmogorov–Smirnov testJournal of Sound and Vibration, 2009
- Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosisJournal of Sound and Vibration, 2009
- Active torsional vibration control of reciprocating enginesControl Engineering Practice, 2008
- Fatigue analysis of crankshaft sections under bending with consideration of residual stressesInternational Journal of Fatigue, 2005
- Source characterization of the lower front-end of a diesel engineApplied Acoustics, 1996
- The Linear Approximated Equation of Vibration of a Pair of Spur Gears (Theory and Experiment)Journal of Mechanical Design, 1994
- Vibration of Power Transmission Helical Gears : Approximate Equation of Tooth StiffnessBulletin of JSME, 1986
- Effects of variable inertia on the damped torsional vibrations of diesel engine systemsJournal of Sound and Vibration, 1976