Anchorage Degradation and Failure Mechanisms of Self-Swelling Split-Sets Under Corrosive Underground Mine Environments
Open Access
- 14 November 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (22) , 11291
Abstract
Corrosion-induced degradation remains a major limitation to the long-term performance of frictional ground-support elements in underground mines, yet the durability of recently developed self-swelling Split-sets remains poorly understood. This study investigates their time-dependent anchorage response under a non-corrosive air control, pure water, pH 3 H2SO4 solution, and 6 wt.% Na2SO4 solution for up to 90 d using pull-out tests, apparent mass loss measurements, X-ray diffraction analysis and scanning electron microscopy. Under aqueous exposure, a distinct two-stage response was observed: mean peak load increased during the first 14 d and subsequently decreased with prolonged exposure. After 90 d, mean peak load decreased by 24.71%, 30.52%, and 38.59% in pure water, pH 3 H2SO4, and 6 wt.% Na2SO4, respectively, relative to the 90 d non-corrosive air control. At later exposure durations, aqueous exposure also shifted the governing failure mode from steel-tube rupture to interfacial sliding. Under aqueous exposure, semi-quantitative XRD estimates of relative Ca(OH)2 content increased during the first 14 d and subsequently decreased, while mean apparent mass loss generally increased. Nevertheless, 90 d mean peak loads remained approximately 3.95–4.87 times those of conventional Split-sets and 1.24–1.48 times those of grouted Split-sets. These results are consistent with a combined influence of early hydration-related strengthening and subsequent exposure-induced degradation; however, the individual contributions of steel corrosion and self-swelling-agent deterioration were not separately quantified. The findings support durability assessment and ground-support selection under the investigated corrosive laboratory conditions.Keywords
Funding Information
- National Natural Science Foundation of China (52074062)
- National Natural Science Foundation of China (52574139)
- State Key Laboratory of Intelligent Deep Metal Mining and Equipment, Northeastern University (IDMEKFJJB13)
- Nazarbayev University (201223FD8835)
This publication has 43 references indexed in Scilit:
- Research on the Energy Constitutive Model and Static Load Anchorage Characteristics of a Novel Mace-Type Energy Release BoltGeotechnical and Geological Engineering, 2024
- Experimental investigation of corrosion-induced degradation of rockbolt considering natural fracture and continuous loadJournal of Central South University, 2023
- An Overview of the Use of Rockbolts as Support Tools in Mining OperationsGeotechnical and Geological Engineering, 2021
- Corrosion Level of Rock Bolts Exposed to Aggressive Environments in Nordic Road TunnelsRock Mechanics and Rock Engineering, 2021
- A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pHEmergent Materials, 2021
- Hydrabolt and Split Set Rock Bolt Selection Method Under the Bieniawski Rock Mass Rating for Improving Horizontal Access Support in Peruvian Mid-Scale Mining Activities2020
- Simplified Consideration for Permanent Rock Dowels in Block Theory and 2-D Limit Equilibrium AnalysesRock Mechanics and Rock Engineering, 2019
- Analytical analysis of pullout resistance of the hydraulic expansion rockbolts on a frictionally coupled modelJournal of Mountain Science, 2016
- Effects of chloride ion concentration and pH values on the corrosion behavior of Cr12Ni3Co12Mo4W ultra-high-strength martensitic stainless steelInternational Journal of Minerals, Metallurgy and Materials, 2016
- Improved Performance of Rock Bolts using Sprayed Polyurea CoatingRock Mechanics and Rock Engineering, 2014