Fatigue crack monitoring in train track steel structures using plastic optical fiber sensor
Authors:
- 15 September 2017
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 28 (10) , 105103
Abstract
Plastic optical fiber (POF) sensors have shown excellent potential for damage detection and structural health monitoring in a variety of engineering structures. This paper discusses the feasibility of using POF sensors in conjunction with a signal-processing algorithm capable of detecting and monitoring fatigue-induced cracks in train track steel structures in real time. The POF sensor, which was modified from an existing design to increase the signal sensitivity, allows for accurate detection of a fatigue crack developed in a specimen, and was found to compare well to the reference acoustic emission (AE) sensors and crack opening displacement (COD) gauge attached to the specimen. The crack-detection technique, which relies on capturing the intensity variation of the POF sensor, was not susceptible to any signal fluctuations commonly associated with intensity-based optical fiber sensors. The results show that the technique has potential for use in detecting the initiation and propagation of specific segments of a structure vulnerable to cracking due to external cyclic loading, e.g. at welded joints in train tracks under train loads or offshore structures subject to wave loads. The POF sensor system is composed of inexpensive parts (LED light source, photodetectors, and data acquisition units) and can easily be installed to the host structure. To validate the proposed damage-detection technique, the instrumented specimens are subjected to cyclic loading in order to induce stable crack propagation in the specimen. A COD gauge and AE were used for the purpose of calibration and comparison. The results show remarkable resemblance in terms of crack initiation and propagation identification exhibited by all three types of sensors, highlighting the potential of the proposed sensor for crack initiation detection and subsequent monitoring of crack propagation.Keywords
Funding Information
- National University of Singapore Academic Research Fund (R-302-000-097-112)
This publication has 21 references indexed in Scilit:
- Fiber Bragg grating sensor fatigue crack real-time monitoring based on spectrum cross-correlation analysisJournal of Sound and Vibration, 2013
- Eddy-current induced thermography—probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloyNDT & E International, 2012
- Distributed Fiber Bragg Grating Sensors for Monitoring Cracks in Concrete Structures2012
- Vibration-based Damage Identification Methods: A Review and Comparative StudyStructural Health Monitoring, 2010
- Ultrasonic Evaluation of Closed Cracks Using Subharmonic Phased ArrayJapanese Journal of Applied Physics, 2008
- An introduction to structural health monitoringPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- Detection of cracks in plates using piezo-actuated Lamb wavesSmart Materials and Structures, 2004
- Acoustic emission monitoring of fatigue crack propagationJournal of Constructional Steel Research, 2003
- A Summary Review of Vibration-Based Damage Identification MethodsThe Shock and Vibration Digest, 1998
- New method for detecting cracks in concrete using fibre opticsMaterials and Structures, 1989