Dimensional accuracy of 3D printing navigation templates of chemical-based sterilisation
Authors:
Open Access
- 24 January 2022
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-15
Abstract
3D printed navigational templates have facilitated the accurate treatment of orthopaedic patients. However, during practical operation, it is found that the location hole occasionally deviates from the ideal channel. As such, there will be a security risk in clinical applications. The purpose of this study was to evaluate the influence of chemical-based sterilisation methods on the dimensional accuracy of different materials and the influence of module parameters on the degree of deformation. We found that polylactic (PLA) modules sterilised with ethylene oxide (EO) would undergo micro-deformation, and these micro-deformation characteristics depend on the building direction, i.e., the module stretches in the Z direction and shrinks in the X and Y directions. Heat-resisting polylactide (HR-PLA) has the same melting temperature (Tm) as PLA, but its glass transition temperature (Tg) is greater than the EO sterilisation temperature, so there is no obvious deformation after EO sterilisation. The layer height of the module were inversely proportional to the degree of deformation in the same sterilisation method. The deformation time of the module is concentrated within 2 h after heating. The micro-deformation of the 3D printing module depends on its Tg, sterilisation temperature, and duration of the sterilisation cycle.Keywords
Funding Information
- Key Scientific Projects of Changzhou Public Health and Family Planning Commission (ZD201510 and ZD201927)
- Natural Science Foundation of Jiangsu Province (BK20181158)
This publication has 37 references indexed in Scilit:
- Accuracy of medical models made by additive manufacturing (rapid manufacturing)Journal of Cranio-Maxillofacial Surgery, 2013
- Sterilization effects on the physical properties and cytotoxicity of poly(glycerol sebacate)Materials Letters, 2013
- Sterilization treatments on polysaccharides: Effects and side effects on pectinFood Hydrocolloids, 2013
- Ethylene oxide's role as a reactive agent during sterilization: Effects of polymer composition and device architectureJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2013
- Accuracy of rapid prototype models for head and neck reconstructionThe Journal of Prosthetic Dentistry, 2011
- Efficacy and accuracy of a novel rapid prototyping drill template for cervical pedicle screw placementComputer Aided Surgery, 2011
- Readily Controllable Step-Growth Polymerization Method for Poly(lactic acid) Copolymers Having a High Glass Transition TemperatureBiomacromolecules, 2010
- Dimensional error of selective laser sintering, three-dimensional printing and PolyJet™ models in the reproduction of mandibular anatomyJournal of Cranio-Maxillofacial Surgery, 2009
- A novel computer‐assisted drill guide template for lumbar pedicle screw placement: a cadaveric and clinical studyThe International Journal of Medical Robotics and Computer Assisted Surgery, 2009
- Analysis of errors in medical rapid prototyping modelsInternational Journal of Oral and Maxillofacial Surgery, 2002