Acid Etching of Titanium for Bonding with Veneering Composite Resins
Open Access
- 1 January 2006
- journal article
- research article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 25 (2) , 382-390
Abstract
Commercially pure titanium (cpTi) was etched using three concentrated acids: 18% HCl, 43% H3PO4, and 48% H2SO4. The bond strengths between five types of veneering composite resin and eight cpTi treatments (involving combinations of sandblasting, acid etching in 48% H2SO4, and vacuum firing) were determined before and after 10,000 and 20,000 thermal cycles. There were no significant differences in the bond strength of resin to cpTi after etching in 48% H2SO4 at 90°C for 15 minutes, at 60°C for 15, 30, or 60 minutes, and after sandblasting with and without vacuum firing (p>0.05); moreover, these treatments yielded the highest values. As for vacuum firing, it had no significant effect on resin bond strength to cpTi before or after 10,000 and 20,000 thermal cycles. We therefore concluded that acid etching in concentrated H2SO4 is a simple and effective surface modification method of titanium for bonding to veneering composite resins.Keywords
This publication has 17 references indexed in Scilit:
- Surface Modification of Pure Titanium by Plasma Exposure and Its Bonding to ResinDental Materials Journal, 2005
- Biomimetic apatite formation on chemically treated titaniumBiomaterials, 2004
- Bonding Strength and Durability of Alkaline-Treated Titanium to Veneering ResinDental Materials Journal, 2004
- Effect of alkaline treatment of pure titanium and its alloys on the bonding strength of dental veneering resinsJournal of Biomedical Materials Research Part A, 2003
- Recent research and development in titanium alloys for biomedical applications and healthcare goodsScience and Technology of Advanced Materials, 2003
- Surface treatment of titanium for adhesive bonding to polymer composites: a reviewInternational Journal of Adhesion and Adhesives, 2001
- Adhesive bonding of titanium with a thione‐phosphate dual functional primer and self‐curing luting agentsEuropean Journal of Oral Sciences, 2000
- Influence of surface oxidation of titanium on adhesionJournal of Dentistry, 1998
- Influence of surface treatments developed for oral implants on the physical and biological properties of titanium. (I) Surface characterization.Clinical Oral Implants Research, 1997
- The Clinical Application of Resin Facing Titanium Crown by Non-Retention Method. The Influence of Heating Time on the Bond Strength.Nihon Hotetsu Shika Gakkai Zasshi, 1997