Delamination Fracture Criteria for Composite Laminates
Authors:
- 1 October 1995
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 29 (15) , 1962-1987
Abstract
Due to the singularity nature of delamination, the fundamental concept of fracture mechanics was applied. However, the oscillatory characteristics near the delamination tip prohibited the use of conventional definition assuming the crack embedded into a homogeneous solid. A proper definition for the stress intensity factors and energy release rates of bimaterial interface cracks was introduced in this paper to study the fracture criterion for delamination. To measure the delamination fracture toughness, the test specimen usually used for the unidirectional composites was redesigned to suit for the cases that the delamination lies between two laminae with different fiber orientations. The test results show that the double cantilever beam (DCB) test is near to pure Mode I and the end-notched flexural (ENF) test is near to pure Mode II. Therefore, like the cracks in homogeneous materials, the test methods DCB and ENF are useful for the measurement of delamination fracture toughness GC and G11,. Based upon this conclusion, a series of cracked-lap shear (CLS) and modified end-notched flexural (MENF) tests and finite element simulation are conducted in this paper to establish the mixed-mode delamination fracture criterion. To validate the proposed fracture criterion, two commonly encountered problems are predicted and tested. One is the prediction of the most probable interface for the onset of delamination and its possible minimum load, in which no delamination was embedded prior to loading. The other is the prediction for the test with delamination existing prior to loading. The results show that the prediction by using this proposed criterion is well matched with the experiment.Keywords
This publication has 22 references indexed in Scilit:
- Fracture parameters for the orthotropic bimaterial interface cracksEngineering Fracture Mechanics, 1993
- Stress intensity factors and energy release rates of delaminations in composite laminatesEngineering Fracture Mechanics, 1992
- Stress Intensity Factor and Energy Release Rate for Interfacial Cracks Between Dissimilar Anisotropic MaterialsJournal of Applied Mechanics, 1990
- Singularities, interfaces and cracks in dissimilar anisotropic mediaProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1990
- Failure Analysis of Composite Laminates with Free EdgeJournal of Composites Technology and Research, 1990
- On strain energy release rates for interfacial cracks in bi-material mediaEngineering Fracture Mechanics, 1987
- Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy1985
- Delamination Crack Growth in Composite Laminates1985
- Characterizing Delamination Growth in Graphite-Epoxy1982
- Some observations on the interlaminar strength of composite laminatesInternational Journal of Mechanical Sciences, 1973