Effect of a Chemical Treatment Series on the Structure and Mechanical Properties of Abaca Fiber (Musa textilis)
Authors:
Open Access
- 25 November 2020
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1015, 64-69
Abstract
This study investigates the relationships between the composition, cell wall microstructure, and mechanical properties of the abaca fiber. Raw abaca fibers have undergone a series of sequential chemical treatments (acetone/methanol, boiling water, EDTA, HCl, NaClO2, and NaOH) to selectively remove certain non-cellulosic components (NCCs) in the fiber, such as waxes, water-soluble fragments, pectin, and lignin in a step-by-step manner. Changes in composition, morphology, and mechanical properties were observed using FTIR spectroscopy and ion chromatography, digital microscope and SEM, and tensile tests, respectively. The raw fiber was composed of 23% NCCs, 18% hemicellulose, and 58% cellulose, and exhibited a 17.4 GPa Young’s modulus and a 444 MPa tensile strength. Furthermore, the raw abaca fibers demonstrated a linear tensile graph without yielding, and a planar fracture surface without fiber pull-outs, thus suggesting a highly elastic but brittle nature. At the end of the alkali treatment, the fibrillated fiber was 83% cellulose, yet the stiffness and strength dropped to 7.3 GPa and 55 MPa, respectively, as more components were removed, and microfibril relaxation and realignment have occurred. Load-bearing cellulose and hemicellulose accounted for 42% and 36% of the stiffness, respectively, due to –OH groups capable of hydrogen bonding. 63% of the strength was due to thenative NCC matrices, which contribute a significant role within the cell wall’s load-transfer activities.Keywords
This publication has 5 references indexed in Scilit:
- Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2016
- Analysis of the role of the main constitutive polysaccharides in the flax fibre mechanical behaviourIndustrial Crops and Products, 2015
- Dependence of tensile properties of abaca fiber fragments and its unidirectional composites on the fragment height in the fiber stemComposites Part A: Applied Science and Manufacturing, 2013
- Crystal transition from cellulose I to cellulose II in NaOH treated Agave americana L. fibreCarbohydrate Polymers, 2011
- Fractionation and characterization of polysaccharides from abaca fibreCarbohydrate Polymers, 1998