Corrosion behavior of riveted joints with electrophoretic treatment in neutral salt spray environment
Authors:
- 3 January 2024
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 75 (5) , 665-677
Abstract
This study delves into the corrosion behavior of riveted joints with electrophoretic treatment in a neutral salt spray environment using tensile test and surface analysis. The results showed that the open‐circuit potentials of the dual‐phase steels (590DP and 780DP) exceeded those of the AlSi10MnMg‐T7 and JDA1b die‐casting aluminum alloys by 100 mV, and exceeded that of the AA6063‐T6 extruded aluminum alloy by 50 mV. AlSi10MnMg‐T7 and JDA1b die‐casting aluminum alloys were more susceptible to corrosion in contrast to the AA6063‐T6 extruded aluminum alloy. The corrosion mechanism of the steel/aluminum riveted joints was not only galvanic corrosion but also oxygen concentration polarization. Over the 720‐h corrosion period, the failure loads of the riveted joints were not reduced at all. On the contrary, they increased at least 17% for the two‐sheet self‐piercing riveting (SPR) joints, 6% for the three‐sheet SPR joints, and 4% for the flow drill screw joints.Keywords
This publication has 30 references indexed in Scilit:
- Research on the Us Electricity Market Based On Price FluctuationsEnergy Procedia, 2016
- Failure behaviour of SPR joints after salt spray testEngineering Structures, 2015
- Effect of Near-Ambient Temperature Changes on the Galvanic Corrosion of an AA2024-T3 and Mild Steel CoupleJournal of the Electrochemical Society, 2014
- Effect of galvanic corrosion on durability of aluminium/steel self-piercing rivet jointsCorrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control, 2014
- The Effects of T5 and T6 Heat Treatments on Wear Behaviour of AA6063 AlloyHigh Temperature Materials and Processes, 2014
- Corrosion behaviour of self-piercing riveted joints2014
- Forming Mechanism of Cold-Press Connection Between Heterogeneous SheetsJOM, 2013
- Durability on alternate immersion test of self-piercing riveting aluminium jointMaterials & Design (1980-2015), 2013
- Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness considerationMaterials & Design (1980-2015), 2011
- Corrosion performance and mechanical properties of joined automotive materialsMaterials and Corrosion, 2011