Fatigue Strength Assessment of Steel Rollers: On the Reliability of the Strain Energy Density Approach on Real Components
Open Access
- 21 June 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (7) , 1015
Abstract
Welded joints are one of the most widely applied methods to join different steel components. However, they introduce stress concentrators that are commonly known to reduce the fatigue strength of structures. Several methods have been developed to assess the fatigue behavior of welded components, such as the Notch Stress Intensity Factors (NSIFs) approach. However, this approach has been reported to be geometry dependent, and does not allow for a direct comparison of failures occurring at the weld toes with those occurring at the weld roots. This drawback has been overcame by considering the value of the strain energy density (SED) range averaged in a control volume ahead of the notch tip. More than 900 fatigue data of welded joints have been summarized within a single scatter band ΔW-N (strain energy range–umber of cycles to failure) using this approach. The reliability of the just mentioned scatter band in summarizing the fatigue data of real components such as steel welded rollers produced by Rulmeca is herein evaluated. The results prove the reliability of the SED approach to assess the fatigue behavior of welded rollers, paving the way to its diffusion in assessing real components.Keywords
This publication has 31 references indexed in Scilit:
- Fatigue Strength of Steel Rollers and Gears Treated by Cavitation Peening with Short Processing Time (A Case of Processing Time of 1 min and 5 min)Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2012
- A review of the volume-based strain energy density approach applied to V-notches and welded structuresTheoretical and Applied Fracture Mechanics, 2009
- Fatigue strength assessment of welded joints: From the integration of Paris’ law to a synthesis based on the notch stress intensity factors of the uncracked geometriesEngineering Fracture Mechanics, 2008
- A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube‐to‐flange joints subjected to combined loadingsFatigue & Fracture of Engineering Materials & Structures, 2004
- Fatigue life improvement of AISI 304L cruciform welded joints by cryogenic treatmentEngineering Failure Analysis, 2003
- Fatigue life prediction of gas tungsten arc welded AISI 304L cruciform joints with different LOP sizesInternational Journal of Fatigue, 2003
- Some new methods for predicting fatigue in welded jointsInternational Journal of Fatigue, 2002
- Notch stress intensity factors and fatigue strength of aluminium and steel welded jointsInternational Journal of Fatigue, 2001
- Fracture initiation at sharp notches: Correlation using critical stress intensitiesInternational Journal of Solids and Structures, 1997
- Surface fatigue failure of nitride-hardened aluminium-chromium-molybdenum steel rollers under pure rolling and sliding-rolling contactsWear, 1979