Amoxicillin degradation from contaminated water by solar photocatalysis using response surface methodology (RSM)
- 8 September 2016
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 23 (22) , 23262-23270
Abstract
In this study, the solar photocatalytic process in a pilot plant with compound parabolic collectors (CPCs) was performed for amoxicillin (AMX) degradation, an antibiotic widely used in the world. The response surface methodology (RSM) based on Box-Behnken statistical experiment design was used to optimize independent variables, namely TiO2 dosage, antibiotic initial concentration, and initial pH. The results showed that AMX degradation efficiency affected by positive or negative effect of variables and their interactions. The TiO2 dosage, pH, and interaction between AMX initial concentration and TiO2 dosage exhibited a synergistic effect, while the linear and quadratic term of AMX initial concentration and pH showed antagonistic effect in the process response. Response surface and contour plots were used to perform process optimization. The optimum conditions found in this regard were TiO2 dosage = 1.5 g/L, AMX initial concentration = 17 mg/L, and pH = 9.5 for AMX degradation under 240 min solar irradiation. The photocatalytic degradation of AMX after 34.95 kJUV/L accumulated UV energy per liter of solution was 84.12 % at the solar plant.Keywords
This publication has 56 references indexed in Scilit:
- Optimization of the TiO2/Ge composition by the response surface method of photocatalytic degradation under ultraviolet-A irradiation and the toxicity reduction of amoxicillinJournal of Industrial and Engineering Chemistry, 2015
- Degradation of four pharmaceuticals by solar photo-Fenton process: Kinetics and costs estimationJournal of Environmental Chemical Engineering, 2015
- Response surface modeling of Carbamazepine (CBZ) removal by Graphene-P25 nanocomposites/UVA process using central composite designWater Research, 2014
- Photolysis and TiO2 photocatalysis of the pharmaceutical propranolol: Solar and artificial lightApplied Catalysis B: Environment and Energy, 2013
- Pillared montmorillonite supported ferric oxalate as heterogeneous photo-Fenton catalyst for degradation of amoxicillinApplied Catalysis A: General, 2012
- On the adsorption/photodegradation of amoxicillin in aqueous solutions by an integrated photocatalytic adsorbent (IPCA): experimental studies and kinetics analysisPhotochemical & Photobiological Sciences, 2011
- Advanced oxidation of amoxicillin by Fenton's reagent treatmentJournal of Hazardous Materials, 2010
- Ozonation of pharmaceutical compounds: Rate constants and elimination in various water matricesChemosphere, 2009
- Removal of selected pharmaceuticals in waters by photochemical processesJournal of Chemical Technology & Biotechnology, 2009
- Antibiotic removal from wastewaters: The ozonation of amoxicillinJournal of Hazardous Materials, 2005