Advanced Pore Structure Characterization of High-Volume Mineral Admixture Steam-Cured Mortar Using X-Ray Computed Tomography
Open Access
Abstract
Steam curing is a widely used method in the production of industrial precast concrete but it often leads to thermal damage that negatively impacts the material’s long-term durability and mechanical strength. The use of supplementary cementitious materials (SCMs) has shown considerable promise in improving pore structure and alleviating these adverse effects. This study employs high-resolution X-ray computed tomography (X-CT) to thoroughly assess how steam curing temperatures and various subsequent curing regimes influence the pore characteristics of mortars containing high volumes of mineral admixtures. The results shows that steam-cured specimens under water curing (ST8012-WA) achieved a compressive strength of 51.72 MPa and flexural strength of 5.85 MPa, representing improvements of 9% and 19.8%, respectively, compared to natural curing (ST8012-NA: 47.32 MPa and 4.88 MPa). The standard-cured specimen (SD) exhibited the highest compressive strength of 54.18 MPa, highlighting the detrimental effects of elevated steam curing temperatures. The findings reveal that higher steam curing temperatures result in increased porosity and decreased mechanical strength, challenges that can be effectively mitigated through appropriate postcuring techniques. Notably, water curing following steam curing proves especially effective in reducing pore size variability and improving the material’s durability. This research offers new insights into the intricate relationships among curing temperature, pore morphology, and mechanical performance, providing practical recommendations to optimize the quality and longevity of steam-cured precast concrete components.Keywords
Funding Information
- Basic Research Innovation Group Project of Gansu Province (21JR7RA347, 2022BEG02056, LZJZSY2024001, 23KYPT01, 21KYPT04, 2024CZYG004, 23CZYG047, 22CZYG018)
- Key Research Program of Ningxia (21JR7RA347, 2022BEG02056, LZJZSY2024001, 23KYPT01, 21KYPT04, 2024CZYG004, 23CZYG047, 22CZYG018)
- Luzhou Key Laboratory of Intelligent Construction and Low-carbon Technology (21JR7RA347, 2022BEG02056, LZJZSY2024001, 23KYPT01, 21KYPT04, 2024CZYG004, 23CZYG047, 22CZYG018)
- Scientific Research Platform by Chengdu Polytechnic (21JR7RA347, 2022BEG02056, LZJZSY2024001, 23KYPT01, 21KYPT04, 2024CZYG004, 23CZYG047, 22CZYG018)
- Chengdu Polytechnic Scientific Research Project (21JR7RA347, 2022BEG02056, LZJZSY2024001, 23KYPT01, 21KYPT04, 2024CZYG004, 23CZYG047, 22CZYG018)
This publication has 34 references indexed in Scilit:
- Fracture mode analysis of cementitious mortars by simultaneous application of 4D-XCT and acoustic emission techniqueConstruction and Building Materials, 2024
- Cement hydration mechanisms through time – a reviewJournal of Materials Science, 2023
- Interfacial mechanical bond characterization between cement pastes and porous aggregates through a coupled XCT and DVC techniqueCement and Concrete Composites, 2023
- Review on effect of steam curing on behavior of concreteCleaner Materials, 2022
- Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damageConstruction and Building Materials, 2022
- Analysis of foamed concrete pore structure of railway roadbed based on X-ray computed tomographyConstruction and Building Materials, 2021
- Effect of steam curing on compressive strength and microstructure of high volume ultrafine fly ash cement mortarConstruction and Building Materials, 2021
- Effects of curing methods of concrete after steam curing on mechanical strength and permeabilityConstruction and Building Materials, 2020
- Three-dimensional characteristics of steel corrosion and corrosion-induced cracks in magnesium oxychloride cement concrete monitored by X-ray computed tomographyConstruction and Building Materials, 2020
- Quantitative analysis of the influence of subfreezing temperature on the mechanical properties of steam-cured concreteConstruction and Building Materials, 2019