Experimental Comparison of Heat Losses in Stepped-Bowl and Re-Entrant Combustion Chambers in a Light Duty Diesel Engine
- 5 April 2016
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Heat loss is one of the greatest energy losses in engines. More than half of the heat is lost to cooling media and exhaust losses, and they thus dominate the internal combustion engine energy balance. Complex processes affect heat loss to the cylinder walls, including gas motion, spray-wall interaction and turbulence levels. The aim of this work was to experimentally compare the heat transfer characteristics of a stepped-bowl piston geometry to a conventional re-entrant diesel bowl studied previously and here used as the baseline geometry. The stepped-bowl geometry features a low surface-to-volume ratio compared to the baseline bowl, which is considered beneficial for low heat losses. Speed, load, injection pressure, swirl level, EGR rate and air/fuel ratio (λ) were varied in a multi-cylinder light duty engine operated in conventional diesel combustion (CDC) mode. Temperature measurements in the engine cooling media were used to set up the engine energy balance and find out how much heat was lost to cooling media in different parts of the engine. Based on these calculations and heat release analysis, conclusions could be drawn regarding how heat losses in different parts of the engine were affected by changes in these parameters. Results were compared to previously published CFD simulations and it was concluded how the heat transfer characteristics differ between the two piston designs.Keywords
This publication has 26 references indexed in Scilit:
- Diesel and DieselLTCCombustion2014
- Energy balance of internal combustion engines using alternative fuelsRenewable and Sustainable Energy Reviews, 2013
- Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty EnginesSAE International Journal of Engines, 2011
- Experimental Study on Thermal Barrier Coated Diesel Engine Performance with Blends of Diesel and Palm BiodieselSAE International Journal of Fuels and Lubricants, 2010
- Miniaturization limitations of HCCI internal combustion enginesApplied Thermal Engineering, 2009
- The effect of thermal barrier coatings on diesel engine performanceSurface and Coatings Technology, 2007
- Computational Study of Heat Transfer to the Walls of a DI Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- The effect of thermal barrier coatings on diesel engine performanceVacuum, 2002
- The Effect of Thermal Barrier Coated Piston Crown on Engine CharacteristicsJournal of Materials Engineering and Performance, 2000
- Effects of thermal barrier coating on a turbocharged diesel engine performanceSurface and Coatings Technology, 1999