Elastohydrodynamic Line-Contact of Compressible Shear Thinning Fluids With Consideration of the Surface Roughness
Authors:
- 24 June 2010
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 132 (3) , 034501
Abstract
Applications involving highly loaded elastohydrodynamic lubrication (EHL), particularly when the lubricant experiences shear thinning, operating with small film thicknesses may necessitate consideration of surface asperities. A modified Reynolds equation with provision for surface roughness and shear thinning is treated to predict the pressure and surface asperity effect in an EHL line-contact. The unknown in the Reynolds equation is the hydrodynamic pressure instead of the total pressure to ensure that the pressure boundary condition at the outlet is properly posed. The Carreau viscosity model is used for characterizing the shear thinning behavior, Patir and Cheng flow factors for taking into the influence of roughness on the lubricating film, and Greenwood–Trip for determination of pressure at the asperity level. The modified Reynolds equation is solved for the hydrodynamic pressure instead of the total pressure with appropriately defined boundary conditions.Keywords
This publication has 10 references indexed in Scilit:
- On the elastohydrodynamic analysis of shear-thinning fluidsProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007
- The Generalized Newtonian Fluid Model and Elastohydrodynamic Film ThicknessJournal of Tribology, 2002
- Equation of state of poly(dimethylsiloxane) meltsJournal of Polymer Science Part B: Polymer Physics, 1998
- Thermal Elastohydrodynamic Lubrication of Rough SurfacesJournal of Tribology, 1990
- Fast Approach for Calculating Film Thicknesses and Pressures in Elastohydrodynamically Lubricated Contacts at High LoadsJournal of Tribology, 1986
- Influence of Surface Roughness and Its Orientation on Partial Elastohydrodynamic Lubrication of RollersJournal of Lubrication Technology, 1983
- Application of Average Flow Model to Lubrication Between Rough Sliding SurfacesJournal of Lubrication Technology, 1979
- An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic LubricationJournal of Lubrication Technology, 1978
- Paper 3: Film Thicknesses in Elastohydrodynamic Lubrication by Silicone FluidsProceedings of the Institution of Mechanical Engineers, Conference Proceedings, 1965
- A generalized Reynolds equation for fluid-film lubricationInternational Journal of Mechanical Sciences, 1962