Immersion Temperature Effects on the Water Absorption Behavior of Hybrid Lignocellulosic Fiber Reinforced-Polyester Matrix Composites
- 9 May 2007
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 46 (5) , 515-520
Abstract
Although economic, ecological, processing and property considerations suggest that it is very attractive to use lignocellulosic fibers as reinforcement in polymer matrix composites, moisture can strongly and deleteriously affect their properties. In this work the water absorption behavior of sisal/cotton, jute/cotton and ramie/cotton hybrid fabric reinforced composites is evaluated. The effect of the temperature of immersion, fiber volume fraction, and predrying of the fabrics before their incorporation onto the composites are evaluated. Sisal was shown to be the most hygroscopic of the fibers analyzed, and its presence leads to higher values of the maximum water content and of the diffusion coefficient of sisal/cotton reinforced composites. Under the range of temperatures analyzed (30–60°C) the volume fraction of the fibers, rather than the temperature itself, was shown to be the main parameter governing water absorption. Predrying usually lowers maximum water content, although for sisal/cotton reinforced composites a reverse trend was observed for the composites with higher volume fractions. This behavior was again attributed to the higher hydrophilic behavior of sisal fibers.Keywords
This publication has 18 references indexed in Scilit:
- Accelerated Aging of Hybrid Ramie-Cotton Resin Matrix Composites in Boiling WaterPolymer-Plastics Technology and Engineering, 2005
- Mechanical properties of phenolic composites reinforced with jute/cotton hybrid fabricsPolymer Composites, 2004
- Analysis of the tensile strength of polyester/hybrid ramie–cotton fabric compositesPolymer Testing, 2004
- Sisal fibre and its composites: a review of recent developmentsComposites Science and Technology, 2000
- The performance of cotton–kapok fabric–polyester compositesPolymer Testing, 1999
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- Studies on Jute Composites—A Literature ReviewPolymer-Plastics Technology and Engineering, 1995
- Composites of glass/modified jute fabric and unsaturated polyester resinComposites, 1989
- Fabrication and properties of natural fibre-reinforced polyester compositesComposites, 1986
- Jute and glass fibre hybrid laminatesJournal of Materials Science, 1986