CHARACTERISTICS OF PIEZOELECTRIC MICRO-SPEAKER FABRICATED WITH ZNO THIN FILM
Authors:
- 18 April 2007
- journal article
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 89 (1) , 141-149
Abstract
A piezoelectric microspeaker was fabricated on the 5 × 5 mm2 diaphragm with highly c-axis oriented ZnO thin film on a heavily compressive-stressed silicon-nitride film. Four masks were used in the fabrication processes of the piezoelectric microspeaker. 0.5 μ m-thick piezoelectric ZnO film was deposited by RF-magnetron sputtering method on an Al bottom electrode. Then, 0.2 μ m-thick Al film was deposited for the top electrode. To enhance the ZnO film quality for improving the microspeaker performance, two-step deposition technique was adopted. The back-side silicon nitride was patterned, and silicon substrate was removed to make a diaphragm. The speaker output pressure level (SPL) of the fabricated microspeaker was measured with the variation of sinusoidal input frequency and compared to that of the commercial piezo-ceramic speaker. The largest SPL of the microspeaker was about 92 dB at the input voltage of 6Vpeak-to − peak, which was measured at the distance of 3 mm from the microspeaker in open field. The SPL of microspeaker was nearly same as that of a commercial piezo-ceramic speaker.Keywords
This publication has 7 references indexed in Scilit:
- Study of a Ferroelectrics-Silicon Integrated Microspeaker and Microspeaker ArrayIntegrated Ferroelectrics, 2005
- Design of an integrated microspeaker and vibration motor used for mobile phonesJournal of Applied Physics, 2003
- Two-step deposition process of piezoelectric ZnO film and its application for film bulk acoustic resonatorsJournal of Vacuum Science & Technology A, 2000
- Measurement of piezoelectric strength of ZnO thin films for MEMS applicationsSmart Materials and Structures, 1998
- Piezoelectric cantilever microphone and microspeakerJournal of Microelectromechanical Systems, 1996
- Piezoelectric microphone with on-chip CMOS circuitsJournal of Microelectromechanical Systems, 1993
- The parylene-aluminum multilayer interconnection system for wafer scale integration and wafer scale hybrid packagingJournal of Electronic Materials, 1989