PMSM Field-Oriented Control with Independent Speed and Flux Controllers for Continuous Operation under Open-Circuit Fault at Light Load Conditions
Open Access
Abstract
Presented in this article is a permanent magnet synchronous motor (PMSM) control under open-circuit fault (OCF) operation using field-oriented control (FOC) with independent speed and flux controllers. The independent control allows the motor to operate efficiently under varying conditions. A simplified control approach is employed to control the PMSM under the OCF situation; the actual flux and torque of the PMSM are directly measured by the stator currents, eliminating the need for estimators or phase-locked-loop (PLL) systems. Matlab/Simulink is employed for the simulation, while hardware experiments are conducted using a dSPACE DS1104. The simulation and the hardware results demonstrate the control method’s effectiveness in maintaining continuous motor operation during OCF, its robustness against OCF conditions, and its ability to adapt under varying conditions, including speed, flux, and load torque change.Keywords
This publication has 39 references indexed in Scilit:
- Fault-Tolerant Capability of Deadbeat-Direct Torque and Flux Control for Three-Phase PMSM DrivesIEEE Transactions on Industry Applications, 2017
- Common Model Predictive Control for Permanent-Magnet Synchronous Machine Drives Considering Single-Phase Open-Circuit FaultIEEE Transactions on Power Electronics, 2016
- Remedial Field-Oriented Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor by Using Reduced-Order Transformation MatricesIEEE Transactions on Industrial Electronics, 2016
- Performance analysis of FOC and DTC for PMSM drives using SVPWM technique2015
- Model-Based Predictive Direct Control Strategies for Electrical Drives: An Experimental Evaluation of PTC and PCC MethodsIEEE Transactions on Industrial Informatics, 2015
- Diagnosis of open‐switch faults in variable speed drives by stator current analysis and pattern recognitionIET Electric Power Applications, 2013
- Comparative performance evaluation of FOC and DTC controlled PMSM drives2013
- Performance analysis of direct torque control of PMSM drive using SVPWM - inverter2012
- IPM synchronous machine drive response to a single-phase open circuit faultIEEE Transactions on Power Electronics, 2002
- Optimum Settings for Automatic ControllersJournal of Dynamic Systems, Measurement, and Control, 1993