Synthesis and characterization of CoFe2O4@SiO2-polyethyleneimine magnetic nanoparticle and its application for ultrasonic-assisted removal of disulfine blue dye from aqueous solution
Open Access
- 2 April 2020
- journal article
- research article
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 13 (5) , 5430-5437
Abstract
In the present work, a simple synthesis approach was applied for the fabrication of CoFe2O4@SiO2-polyethyleneimine magnetic nanoparticles as an effective sorbent for ultrasonic-assisted removal of disulfine blue dye from an aqueous solution. For identification and characterization of prepared sorbent, different analysis including Fourier transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FE-SEM), Vibrating sample magnetometer (VSM), Energy dispersive X-ray analysis (EDX) and Transmission electron microscopy (TEM) were applied. The effect of effective parameters on the removal of disulfine blue such as pH, sorbent mass, ultrasonic time and disulfine blue concentration were also assessed. The optimum values for investigated parameters were achieved to be as follows: pH of 5.0, sorbent mass of 0.015 g, ultrasonic time of 5.0 min and disulfine blue concentration of 10.0 mg L-1. Different isotherm and kinetic models were used for the evaluation of isotherm and kinetic of adsorption. Results showed that the Langmuir isotherm model was better than other isotherm models as well as the second-order equation model was selected as a kinetic model. The maximum adsorption capacity of the proposed magnetic sorbent was achieved to be 110.0 mg g-1 which shows the applicability of proposed sorbent for removal of disulfine blue dye from aqueous solution.Keywords
This publication has 36 references indexed in Scilit:
- Magnetic solid phase extraction with CoFe2O4/oleic acid nanoparticles coupled to gas chromatography-mass spectrometry for the determination of alkylphenols in baby foodsFood Chemistry, 2017
- Design and construction of nanoscale material for ultrasonic assisted adsorption of dyes: Application of derivative spectrophotometry and experimental design methodologyUltrasonics Sonochemistry, 2017
- Comparative study on ultrasonic assisted adsorption of dyes from single system onto Fe3O4 magnetite nanoparticles loaded on activated carbon: Experimental design methodologyUltrasonics Sonochemistry, 2017
- Modeling and optimization of simultaneous removal of ternary dyes onto copper sulfide nanoparticles loaded on activated carbon using second-derivative spectrophotometryJournal of the Taiwan Institute of Chemical Engineers, 2016
- Sensitive determination of As (III) and As (V) by magnetic solid phase extraction with Fe@polyethyleneimine in combination with hydride generation atomic fluorescence spectrometryTalanta, 2016
- Novel strategy for synthesis of magnetic dummy molecularly imprinted nanoparticles based on functionalized silica as an efficient sorbent for the determination of acrylamide in potato chips: Optimization by experimental design methodologyTalanta, 2016
- Rapid adsorption of ternary dye pollutants onto copper (I) oxide nanoparticle loaded on activated carbon: Experimental optimization via response surface methodologyJournal of Environmental Chemical Engineering, 2016
- Chelating adsorption properties of PEI/SiO2 for plumbum ionJournal of Hazardous Materials, 2007
- Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical routeJournal of Magnetism and Magnetic Materials, 2007
- Controlled growth of monodisperse silica spheres in the micron size rangeJournal of Colloid and Interface Science, 1968