Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM
Open Access
Abstract
The great geometric complexity that additive manufacturing allows in parts, together with the possibility of combining several materials in the same part, establishes a new design and manufacturing paradigm. Despite the interest of many leading sectors, the lack of standardization still makes it necessary to carry out characterization work to enjoy these advantages in functional parts. In many of these techniques, the process does not end with the end of the machine cycle, but different post-processing must be carried out to consider the part finished. It has been found that the type of post process applied can have a similar effect on part quality as other further studied process parameters. In this work, the material projection technique was used to manufacture multi-material parts combining resins with different mechanical properties. The influence of different post-processing on the tensile behavior of these parts was analyzed. The results show the detrimental effect of ultrasonic treatment with isopropyl alcohol in the case of the more flexible resin mixtures, being advisable to use ultrasonic with mineral oil or furnace treatment. For more rigid mixtures, the furnace is the best option, although the other post-processing techniques do not significantly deteriorate their performance.Keywords
This publication has 32 references indexed in Scilit:
- Additive manufacturing applications in medical cases: A literature based reviewAlexandria Journal of Medicine, 2018
- Advanced 3D printing technologies for the aircraft industry: a fuzzy systematic approach for assessing the critical factorsThe International Journal of Advanced Manufacturing Technology, 2018
- The effect of anisotropy on the optimization of additively manufactured lattice structuresAdditive Manufacturing, 2017
- Material jetting additive manufacturing: An experimental study using designed metrological benchmarksPrecision Engineering, 2017
- A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material JettingAdditive Manufacturing, 2017
- Investigation of Quasi-Static Indentation Response of Inkjet Printed Sandwich Structures under Various Indenter GeometriesMaterials, 2017
- Innovative advances in additive manufactured moulds for short plastic injection seriesProcedia Manufacturing, 2017
- Exploring variability of orientation and aging effects in material properties of multi-material jetting partsRapid Prototyping Journal, 2016
- The status, challenges, and future of additive manufacturing in engineeringComputer-Aided Design, 2015
- Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structureMaterials & Design (1980-2015), 2015