Effect of silver nanoparticles on hardness in medium-density fiberboard (MDF)
Authors:
Open Access
- 1 October 2015
- journal article
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 8 (5) , 677-680
Abstract
Effect of silver nanoparticles on hardness in medium-density fiberboard (MDF) was studied here. A 400 ppm aqueous nanosilver suspension was used at three consumption levels of 100, 150, and 200 mL kg-1, based on the dry weight of wood fibers; the results were then compared with the control panels. The size range of silver nanoparticles was 30-80 nm. Composite mats were hot-pressed for 6, 8, and 10 min. Results showed that the uniform and even dispersion of nanoparticles throughout the MDF-matrix significantly contributed to an increase in the hardness at lower hot-press time of 6 min. In the longer hot-press times, however, over-heating of the mat resulted in significant a decrease of hardness values. Significant high correlation was observed between water absorption and thickness swelling.Keywords
This publication has 5 references indexed in Scilit:
- Correlation between sound absorption coefficients with physical and mechanical properties of insulation boards made from sugar cane bagasseComposites Part B: Engineering, 2014
- Brown rot on nuts of Castanea sativa Mill: an emerging disease and its causal agentiForest - Biogeosciences and Forestry, 2013
- Industrial production of pine tannin-bonded particleboard and MDFEuropean Journal of Wood and Wood Products, 2012
- Micromechanical properties of the interphase in pMDI and UF bond linesWood Science and Technology, 2011
- Property comparisons and bonding efficiency of UF and PMDI bonded particleboards as affected by key process variablesBioResources, 2006