Bead Geometry Prediction in Laser-Wire Additive Manufacturing Process Using Machine Learning: Case of Study
Open Access
- 15 December 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 11949
Abstract
In Laser Wire Additive Manufacturing (LWAM), the final geometry is produced using the layer-by-layer deposition (beads principle). To achieve good geometrical accuracy in the final product, proper implementation of the bead geometry is essential. For this reason, the paper focuses on this process and proposes a layer geometry (width and height) prediction model to improve deposition accuracy. More specifically, a machine learning regression algorithm is applied on several experimental data to predict the bead geometry across layers. Furthermore, a neural network-based approach was used to study the influence of different deposition parameters, namely laser power, wire-feed rate and travel speed on bead geometry. To validate the effectiveness of the proposed approach, a test split validation strategy was applied to train and validate the machine learning models. The results show a particular evolutionary trend and confirm that the process parameters have a direct influence on the bead geometry, and so, too, on the final part. Several deposition parameters have been found to obtain an accurate prediction model with low errors and good layer deposition. Finally, this study indicates that the machine learning approach can efficiently be used to predict the bead geometry and could help later in designing a proper controller in the LWAM process.Keywords
Funding Information
- Interreg V-A Grande "Fabrication Additive par Dépôt de Fil" (FAFil) project (050-4-08-126)
This publication has 40 references indexed in Scilit:
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steelMaterials & Design (1980-2015), 2013
- The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal depositionOptics & Laser Technology, 2012
- Experimental design approach to optimize selective laser melting of martensitic 17‐4 PH powder: part I – single laser tracks and first layerRapid Prototyping Journal, 2012
- Control of melt pool temperature and deposition height during direct metal deposition processThe International Journal of Advanced Manufacturing Technology, 2011
- Genetic algorithm for optimization of welding variables for height to width ratio and application of ANN for prediction of bead geometry for TIG welding processApplied Soft Computing, 2010
- Selective laser melting technology: From the single laser melted track stability to 3D parts of complex shapePhysics Procedia, 2010
- A mechatronics approach to laser powder deposition processMechatronics, 2006
- Characterization of the process control for the direct laser metallic powder depositionSurface and Coatings Technology, 2006
- Parametric studies of multi-material laser densificationMaterials Science and Engineering: A, 2006
- Sensing, modeling and control for laser-based additive manufacturingInternational Journal of Machine Tools and Manufacture, 2003