Study of Innovative Connector for Steel–Concrete Composite Structures
Open Access
- 3 April 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (7) , 3003
Abstract
The paper presents an analysis of the innovative connector for manufacturing a steel–concrete composite beam. The connector consists of a corrugated metal sheet in the shape of a dovetail and shot nails. The nails are shot through the sheet fold into the flange of the steel I-section. Experimental studies of push-out tests were carried out. The conducted tests proved that the proposed solution can be applied as the fastener for steel–concrete composite beams for the construction of ceilings in utility public buildings with small beam’s span. Considering the criteria presented in the Eurocode 4 standard and the results of the experiments, it was proven that all analyzed types of fasteners are ductile. The connector made of sheet with a thickness of 1.00 mm and 2 nails is characterized by a breaking load of 30.83 kN. The load-bearing capacity of the fastener can be adjusted by changing the corrugated sheet thickness and changing the number of nails shot in the single fold of the sheet.Keywords
This publication has 23 references indexed in Scilit:
- New predictive equations for LDB strength assessment of steel–concrete composite beamsEngineering Structures, 2022
- Numerical study of steel–concrete composite beam with composite dowels connectorsComputers & Structures, 2021
- Push-out and bending tests of steel-concrete adhesively bonded composite elementsEngineering Structures, 2021
- Modelling and parameter identification of steel–concrete composite beams in 3D rigid finite element methodArchives of Civil and Mechanical Engineering, 2020
- Optimization of composite dowels shape in steel-concrete composite floorComposite Structures, 2019
- An experimental and numerical study of aluminium–concrete joints and composite beamsArchives of Civil and Mechanical Engineering, 2019
- Numerical and experimental tests of steel-concrete composite beam with the connector made of top-hat profileComposite Structures, 2019
- Flexural performance of innovative sustainable composite steel-concrete beamsEngineering Structures, 2017
- Finite element analysis of new composite floors having cold-formed steel and concrete slabEngineering Structures, 2014
- Experimental study of bonded steel concrete composite structuresJournal of Constructional Steel Research, 2007