Thermal Cycling Effect in a Traction Inverter for Star-connected and Open-end Winding Permanent Magnet Synchronous Motors with Nearly Constant Losses Current Regulation
Authors:
- 26 January 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
One of the causes of faults in the electric drive is the failure of the power semiconductor module. Semiconductors degrade under the effect of thermal cycles. Thermal aging of materials occurs due to temperature difference between the elements of the power module as well as difference of their thermal expansion coefficients, which eventually leads to the destruction of the power module construction. The influence of thermal cycles is most expressed in traction drives, which are characterized by modes with low speeds and variation of commanded torque in time. This article considers a BMW i3 electric drive model and an open-end winding drive with Nearly Constant Losses Current Regulation for evaluating thermal cycles in a power module. The new European driving cycle was used as a test cycle for both drives. It is shown how the proposed algorithm makes it possible to reduce the thermocycling effects in semiconductor devices.Keywords
This publication has 16 references indexed in Scilit:
- Prediction of Electric Vehicle Range: A Comprehensive Review of Current Issues and ChallengesEnergies, 2019
- Torque Quality Improvement of an Open-End Winding PMSM2018
- Estimation of the requirements for hybrid electric powertrain based on analysis of vehicle trajectory using GPS and accelerometer data2018
- Control strategy for synchronous homopolar motor in traction applications2017
- Junction Temperature Control for More Reliable Power ElectronicsIEEE Transactions on Power Electronics, 2017
- Thermal stabilization of power devices for compressor drive with start/stop operation mode2016
- Dual-Space Vector Control of Open-End Winding Permanent Magnet Synchronous Motor Drive Fed by Dual InverterIEEE Transactions on Power Electronics, 2016
- Active flux based motion-sensorless vector control of DC-excited synchronous machines2009
- Fault Tolerant Three-Phase AC Motor Drive Topologies: A Comparison of Features, Cost, and LimitationsIEEE Transactions on Power Electronics, 2004
- A permanent magnet synchronous motor for traction applications of electric vehicles2003