Enhancing the Utilization Potential of a Low Grade Chromite Ore through Extensive Physical Separation
Authors:
- 26 March 2014
- journal article
- benefication of-ore
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 49 (12) , 1937-1945
Abstract
Low grade chromite ore with less than 30% Cr2O3 was investigated with a view to enhance its utilization potential. The ore contained olivine, serpentine, and chrysotile as the gangue minerals. The chromite mineral contained alumina, magnesia, and FeO in its lattice. Critical mineralogical assessment indicated that enrichment to a level of 39-43% Cr2O3 may be possible. Beneficiation of the ore was undertaken using gravity based methods. Inadequate liberation prevented any significant enrichment at 0.9 mm top size. At 0.3 mm top size, the spiral concentration generated a concentrate with 40.5% Cr2O3 from the coarser fraction. The finer fraction was treated in a shaking table to generate another concentrate with 41.6% Cr2O3. The final combined concentrate assayed 41.2% Cr2O3 with a Cr/Fe ratio of 2.27. The middling from both treatments were rich in chromite content and were recommended to be included in the concentrates. Chromite recovery from the coarse reject was also beneficial. It was recommended that 8-10% solids content of the reject stream with 0.02 kg/t of Magnafloc flocculant may be used to achieve best settling characteristics of the reject fines.Keywords
This publication has 7 references indexed in Scilit:
- Modeling and optimization of spiral concentrator for separation of ultrafine chromitePowder Technology, 2012
- Chrome ore beneficiation challenges & opportunities – A reviewMinerals Engineering, 2011
- Metamorphic redistribution of Cr within chromitites and its influence on chromite ore enrichmentMinerals Engineering, 2011
- Application of response surface methodology and central composite rotatable design for modeling and optimization of a multi-gravity separator for chromite concentrationPowder Technology, 2008
- The feasibility of a slip velocity model for predicting the enrichment of chromite in a Floatex density separatorInternational Journal of Mineral Processing, 2007
- Effects of frother type and froth height on the flotation behaviour of chromite in UG2 oreMinerals Engineering, 2003
- A new flowsheet for processing chromite fines by column flotation and the collector adsorption mechanismMinerals Engineering, 1999