Fault-Tolerant Multilevel Converter Topology
- 1 July 2006
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (21635137) , 1577-1582
Abstract
This paper presents a modified topology of the neutral-point-clamped converter. The main change consists on adding a fourth leg, which is based on the flying-capacitor converter structure. The aim of this additional leg is to provide fault tolerance to the converter. Furthermore, during normal operation mode, this leg is able to provide a stiff neutral voltage. Consequently, the low-frequency voltage oscillations that appear in the neutral point of the standard three-level topology for some operation conditions no longer exist. As a result, the modulation strategy of the three main legs of the converter does not have to take care of voltage balance, and it can be design to achieve optimal output voltage waveforms, as well as to improve efficiency of the converter. Some simulation results are presented to show viability of this approach under both, normal operation mode and fault event. Experimental results are expected to include in the final paper.Keywords
This publication has 12 references indexed in Scilit:
- Evaluation of the Low-Frequency Neutral-Point Voltage Oscillations in the Three-Level InverterIEEE Transactions on Industrial Electronics, 2005
- A Multilevel Converter Topology With Fault-Tolerant AbilityIEEE Transactions on Power Electronics, 2005
- Effects of Imbalances and Nonlinear Loads on the Voltage Balance of a Neutral-Point-Clamped InverterIEEE Transactions on Power Electronics, 2005
- Fault Tolerant Three-Phase AC Motor Drive Topologies: A Comparison of Features, Cost, and LimitationsIEEE Transactions on Power Electronics, 2004
- A Unique Fault-Tolerant Design for Flying Capacitor Multilevel InverterIEEE Transactions on Power Electronics, 2004
- Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive SystemsIEEE Transactions on Industrial Electronics, 2004
- Optimized space vector switching sequences for multilevel invertersIEEE Transactions on Power Electronics, 2003
- A comprehensive study of neutral-point voltage balancing problem in three-level neutral-point-clamped voltage source PWM invertersIEEE Transactions on Power Electronics, 2000
- Multi-Level Choppers for High Voltage ApplicationsEPE Journal, 1992
- A New Neutral-Point-Clamped PWM InverterIEEE Transactions on Industry Applications, 1981