High-energy (MeV) Al and B ion implantations into 4H-SiC and fabrication of pin diodes
Open Access
- 28 March 2002
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 91 (7) , 4242-4248
Abstract
High-energy (MeV) implantation of or into 4H-SiC epilayers has been investigated. A 3 μm deep pn junction was formed by multiple-step or implantation with implantation energies up to 6.2 or 3.4 MeV, respectively. Rutherford backscattering channeling and cross-sectional transmission electron microscopy analyses have revealed residual damages in the implanted layers even after high-temperature annealing at Nevertheless, high electrical activation ratios over 90% have been achieved for both - and -implanted layers by annealing at Mesa pin diodes with a 15-μm-thick layer formed by MeV implantation have exhibited high breakdown voltages of 2860–3080 V. The reverse characteristics of diodes have been substantially improved by increasing annealing temperature up to The diode performance is discussed with the results of deep level analyses near the junctions.
Keywords
This publication has 14 references indexed in Scilit:
- Fast Epitaxial Growth of 4H–SiC by Chimney-Type Vertical Hot-Wall Chemical Vapor DepositionJapanese Journal of Applied Physics, 2001
- Deep Level Investigation of pn-Junctions formed by MeV Aluminum and Boron Implantation into 4H-SiCMaterials Science Forum, 2001
- Planar p-n Diodes Fabricated by MeV-Energy and High-Temperature Selective Implantation of Aluminum to 4H-SiCMaterials Science Forum, 2001
- Doping of silicon carbide by ion implantationMaterials Science Forum, 2000
- Formation of Deep pn Junctions by MeV Al- and B-ion Implantations into 4H-SiC and Reverse CharacteristicsMaterials Science Forum, 2000
- High Temperature Implant Activation in 4H and 6H-SiC in a Silane Ambient to Reduce Step BunchingMaterials Science Forum, 2000
- Surface roughening in ion implanted 4H-silicon carbideJournal of Electronic Materials, 1999
- Electron microscopic study on residual defects of Al+ or B+ implanted 4H-SiCJournal of Electronic Materials, 1999
- Al+ and B+ implantations into 6H-SiC epilayers and application to pn junction diodesJournal of Electronic Materials, 1998
- Step-controlled epitaxial growth of SiC: High quality homoepitaxyMaterials Science and Engineering: R: Reports, 1997