A PBM-Based Procedure for the CFD Simulation of Gas–Liquid Mixing with Compact Inline Static Mixers in Pipelines
Open Access
Abstract
A compact static mixer for gas–liquid dispersion in pipelines is studied in this paper with a Reynolds averaged two fluid model approach. A procedure based on the lumped parameter solution of a population balance model is applied to obtain the bubble Sauter mean diameter needed to model the interphase forces. The gas distribution in the pipe is analyzed in two different operative conditions and the efficiency of the static mixer is assessed in terms of the gas homogeneity in the pipe section, with low coefficients of variations being obtained. A computational model to obtain the volumetric mass transfer coefficient, kLa, developed for partially segregated systems is applied finding kLa values comparable to those typically obtained with other static mixers. The proposed computational model allows us to locally analyze the oxygen transfer rate by observing the limitations due to gas accumulation behind the body of the static mixer, which leads to the local depletion of the driving force. Geometrical optimization of the static element is proposed, based on the analysis of gas–liquid fluid dynamics and of the interphase mass transfer phenomena.Keywords
This publication has 38 references indexed in Scilit:
- Comparison of Mass Transfer Efficiency and Energy Consumption in Static MixersOzone: Science & Engineering, 2010
- Structure, Energy, Synergy, Time—The Fundamentals of Process IntensificationIndustrial & Engineering Chemistry Research, 2009
- CFD simulation of bubbly two-phase flow in horizontal pipesChemical Engineering Journal, 2008
- Performance of Kenics static mixer over a wide range of Reynolds numberChemical Engineering Journal, 2008
- On the numerical study of isothermal vertical bubbly flow using two population balance approachesChemical Engineering Science, 2007
- Experimental determination of the drag coefficient in a swarm of bubblesChemical Engineering Science, 2007
- Three-dimensional numerical simulation of flow and heat transfer in the Sulzer SMX static mixerChemical Engineering Science, 1999
- Optimization of a Kenics static mixer for non-creeping flow conditionsChemical Engineering Journal, 1999
- Turbulence. 2nd edition. By J. 0. HINZE. McGraw-Hill, 1975. 790 pp. £19.40.Journal of Fluid Mechanics, 1977
- An eddy cell model of mass transfer into the surface of a turbulent liquidAIChE Journal, 1970