Reactive power compensation capability of a matrix converter-based FACTS device
Authors:
- 1 June 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
In this paper a shunt FACTS device composed of a matrix converter and a permanent magnet machine is suggested for reactive power compensation at the point of connection to the grid. The device can either provide pure reactive power compensation or reactive power compensation in combination with active power control. The conventional indirect space vector modulation (ISVM) scheme was first chosen to modulate the matrix converter because of its simplicity. The modulation is described and its impact on the reactive power range of the FACTS device is analyzed. The ISVM presents some serious limitations for the reactive compensation range at low matrix converter output power factors and the FACTS cannot provide pure reactive power compensation with this modulation. The use of hybrid modulation, based on ISVM, is suggested to remedy these issues and the new reactive compensation range is calculated. A simulation model of the FACTS device was implemented and the results of the simulation study are confronted with the analytical results.Keywords
This publication has 9 references indexed in Scilit:
- Overview of FACTS devices for wind power plants directly connected to the transmission network2010
- Reactive power compensation using an indirectly space vector-modulated matrix converter2010
- A novel engine generator system with active filter and UPS functions using a matrix converter2007
- A Novel Approach to Practical Matrix Converter Motor Drive System With Reverse Blocking IGBTIEEE Transactions on Power Electronics, 2005
- Novel modulation schemes for conventional and sparse matrix converters facilitating reactive power transfer independent of active power flow2004
- Matrix converters: a technology reviewIEEE Transactions on Industrial Electronics, 2002
- Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch stateIEEE Transactions on Industrial Electronics, 2002
- Proposed terms and definitions for flexible AC transmission system (FACTS)IEEE Transactions on Power Delivery, 1997
- High Power Electronics and flexible AC Transmission SystemIEEE Power Engineering Review, 1988