Transforming from planar to three-dimensional lithium with flowable interphase for solid lithium metal batteries
Open Access
- 6 October 2017
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 3 (10) , eaao0713-0713
Abstract
Solid-state lithium (Li) metal batteries are prominent among next-generation energy storage technologies due to their significantly high energy density and reduced safety risks. Previously, solid electrolytes have been intensively studied and several materials with high ionic conductivity have been identified. However, there are still at least three obstacles before making the Li metal foil-based solid-state systems viable, namely, high interfacial resistance at the Li/electrolyte interface, low areal capacity, and poor power output. The problems are addressed by incorporating a flowable interfacial layer and three-dimensional Li into the system. The flowable interfacial layer can accommodate the interfacial fluctuation and guarantee excellent adhesion at all time, whereas the three-dimensional Li significantly reduces the interfacial fluctuation from the whole electrode level (tens of micrometers) to local scale (submicrometer) and also decreases the effective current density for high-capacity and high-power operations. As a consequence, both symmetric and full-cell configurations can achieve greatly improved electrochemical performances in comparison to the conventional Li foil, which are among the best reported values in the literature. Noticeably, solid-state full cells paired with high–mass loading LiFePO4 exhibited, at 80°C, a satisfactory specific capacity even at a rate of 5 C (110 mA·hour g−1) and a capacity retention of 93.6% after 300 cycles at a current density of 3 mA cm−2 using a composite solid electrolyte middle layer. In addition, when a ceramic electrolyte middle layer was adopted, stable cycling with greatly improved capacity could even be realized at room temperature.Keywords
Funding Information
- U.S. Department of Energy (award351198, Battery Materials Research (BMR) program)
- U.S. Department of Energy (award351199, Battery 500 Consortium program)
This publication has 51 references indexed in Scilit:
- Sustainability and in situ monitoring in battery developmentNature Materials, 2016
- Challenges and prospects of the role of solid electrolytes in the revitalization of lithium metal batteriesJournal of Materials Chemistry A, 2016
- Technology: A solid futureNature, 2015
- Interconnected hollow carbon nanospheres for stable lithium metal anodesNature Nanotechnology, 2014
- Lithium metal anodes for rechargeable batteriesEnergy & Environmental Science, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- Building better batteriesNature, 2008
- Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12Angewandte Chemie International Edition, 2007
- The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer InterfacesJournal of the Electrochemical Society, 2005
- Issues and challenges facing rechargeable lithium batteriesNature, 2001