1.22mW/Gb/s 9.6Gb/s data jitter mixing forwarded-clock receiver robust against power noise with 1.92ns latency mismatch between data and clock in 65nm CMOS
Authors:
- 1 June 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21585601,p. 144-145
Abstract
This paper presents a data jitter mixing forwarded-clock receiver which is robust against power supply induced jitter (PSIJ) and overcomes 1.92ns latency mismatch between data and clock. The forwarded-clock architecture has a tradeoff between the number of clock channels and the achievable data rate due to the lack of the jitter correlation between data and clock. Moreover, PSIJ due to a long clock distribution network and an injection-locked oscillator reduces the jitter correlation further. The proposed receiver eases this tradeoff, and also increases the jitter correlation reduced by PSIJ. The test chip achieves 9.6Gb/s with 1.22mW/Gb/s and occupies only 0.017mm2 in 65nm CMOS.Keywords
This publication has 4 references indexed in Scilit:
- A 5 Gb/s Link With Matched Source Synchronous and Common-Mode Clocking TechniquesIEEE Journal of Solid-State Circuits, 2011
- A 1.296-to-5.184Gb/s Transceiver with 2.4mW/(Gb/s) Burst-mode CDR using Dual-Edge Injection-Locked Oscillator2010
- CMOS Oscillators for Clock Distribution and Injection-Locked DeskewIEEE Journal of Solid-State Circuits, 2009
- A 2.4 Gb/s/pin simultaneous bidirectional parallel link with per-pin skew compensationIEEE Journal of Solid-State Circuits, 2000