Narrow-gap tungsten inert gas welding of 78-mm-thick Ti–6Al–4V alloy
Authors:
- 1 October 2016
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 32 (15) , 1545-1552
Abstract
Narrow-gap tungsten inert gas welding with in situ protective system is applied to 78-mm-thick Ti–6Al–4V alloy. The martensite basketweave microstructure is formed in fusion zone (FZ), and heat-affected zone (HAZ) near FZ consists of acicular martensite and a small portion of primary alpha phase. The HAZ near base metal (BM) consists of primary alpha and transformed beta phase. Microhardness values of FZ and HAZ are relatively higher, and peak values appear at HAZ near FZ. The mechanical heterogeneity is dependent on variation of beta phase and martensite, which in turn depend on specific thermal cycle(s). The average tensile strength reaches 783.3 MPa and is 91.2% of BM, which appears in the middle of the weld with orthogonal martensites.Keywords
Funding Information
- National Natural Science Foundation of China (50974046, 50904020)
This publication has 25 references indexed in Scilit:
- Effect of primary alpha phase variation on mechanical behaviour of Ti–6Al–4V alloyMaterials Science and Technology, 2015
- Effect of welding parameters on morphology and mechanical properties of Ti–6Al–4V laser beam welded butt jointsJournal of Materials Processing Technology, 2012
- Effect of welding processes on joint characteristics of Ti–6Al–4V alloyScience and Technology of Welding and Joining, 2011
- Influence of the filler metal on the mechanical properties of Ti–6Al–4V electron beam weldmentsVacuum, 2010
- Modulated Nd : YAG laser welding of Ti–6Al–4VScience and Technology of Welding and Joining, 2010
- Microstructure and Mechanical Properties of Gas-Tungsten-Arc–Welded Ti-15-3 Beta Titanium AlloyMetallurgical and Materials Transactions A, 2009
- Influence of current pulsing on microstructure and mechanical properties of Ti–6Al–4V TIG weldmentsScience and Technology of Welding and Joining, 2006
- Effect of welding on microstructure and tensile properties of flowformed Ti-6Al-4V tubesMaterials Science and Engineering: A, 2005
- Electron beam welded high thickness Ti6Al4V plates using filler metal of similar and different composition to the base plateVacuum, 2001
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996