Comparison of selected inhibitor doped sol–gel coating systems for protection of mild steel
- 5 December 2013
- journal article
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 49 (3) , 189-196
Abstract
Current legislation around the use of antifouling and anticorrosion coatings has increased the need to find an environment friendly alternative to existing biocide containing pretreatments for steel structures exposed to sea water. Sol–gel technology offers a solution to fouling and corrosion inhibition since sol–gel chemistry lends itself ideally to functionalisation with a variety of components, for example, corrosion inhibitors. In this study, we have utilised the above mentioned approach in order to produce an inhibitor doped sol–gel protective coating on mild steel. The corrosion protection performance of three inhibitors, i.e. SD (Shieldex303), MOLY (Moly-White101ED-PLUS) and ZAPP (Heucophos ZAPP), added individually to a sol–gel, and applied to mild steel Q panels, were evaluated using electrochemical impedance spectroscopy. The inhibitor containing coatings were shown to protect against corrosion of mild steel; the coatings containing the inhibitors Moly and ZAPP were the most effective of the systems tested. Highlights • Sol–gel coatings are potential candidate systems for the protection of mild steel substrates. • Sol–gel chemistry allows a variety of corrosion inhibitors to be incorporated into the sol–gel coating matrix. • Evaluation of corrosion inhibition efficiency of sol–gel coatings can be assessed using electrochemical impedance spectroscopy (EIS).Keywords
This publication has 23 references indexed in Scilit:
- Phytic acid doped nanoparticles for green anticorrosion coatingsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy systemInternational Journal of Adhesion and Adhesives, 2010
- Biotic Sol-Gel Coating for the Inhibition of Corrosion in SeawaterECS Transactions, 2010
- Novel hybrid sol–gel coatings for corrosion protection of AZ31B magnesium alloyElectrochimica Acta, 2008
- Biological Functionalization of a Sol–Gel Coating for the Mitigation of Microbial‐induced CorrosionAdvanced Functional Materials, 2007
- Sol-gel coatings on carbon steel: Electrochemical evaluationSurface and Coatings Technology, 2006
- Sol–gel coatings for corrosion protection of metalsJournal of Materials Chemistry, 2005
- Nanostructured sol–gel derived conversion coatings based on epoxy- and amino-silanesProgress in Organic Coatings, 2003
- Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steelProgress in Organic Coatings, 2002
- Inhibition of mild steel by polyphosphatesCorrosion Science, 1976