TiB / 30 wt.% Ti layered composite material obtained by free SHS compression on a Ti6Al4V titanium alloy
Authors:
- P M BazhinPBP M Bazhin
- A P ChizhikovACA P Chizhikov
- A S KonstantinovAKA S Konstantinov
- A D ProkopetsAPA D Prokopets
- E V KostitsynaEKE V Kostitsyna
- A V BolotskayaABA V Bolotskaya
- A M StolinASA M Stolin
- N Yu KhomenkoNKN Yu Khomenko
Open Access
- 1 May 2020
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 848 (1)
Abstract
In this work, a layered composite material based on TiB/30 wt.% Ti on a Ti6Al4V titanium alloy was obtained by free SHS compression. Powders of titanium and amorphous black boron were used as initial components. The structural features, phase composition, porosity and distribution of microhardness along the height of the layered material were studied. It was shown that, as a result of synthesis and subsequent high-temperature deformation, the following phases were formed in the layered composite material: TiB, TiB2, Ti0, 76N. It was found that at a compression pressure of 50 MPa a layered composite material with a porosity of up to 1-2% is formed. It was found that the delay time before applying pressure affects the size of the diffusion zone in the range of 10-50 microns. Due to the formation of hardening phases in the composite material on Ti6Al4V, the microhardness of its surface increased from 2.4 to 11 GPa.Keywords
This publication has 13 references indexed in Scilit:
- Multi-layered structures of Ti-6Al-4V alloy and TiC and TiB composites on its base fabricated using blended elemental powder metallurgyJournal of Materials Processing Technology, 2019
- Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated TemperaturesMetallurgical and Materials Transactions A, 2019
- Microstructure and wear properties of multi ceramics reinforced metal-matrix composite coatings on Ti–6Al–4V alloy fabricated by laser surface alloyingSurface Engineering, 2019
- Effects Ti/TiAlN composite multilayer coatings on corrosion resistance of titanium alloy in solid NaCl-H2O-O2 at 600 °CJournal of Alloys and Compounds, 2018
- Very high‐cycle fatigue behaviour ofTi‐6Al‐4Valloy under corrosive environmentFatigue & Fracture of Engineering Materials & Structures, 2017
- Hot corrosion behaviour of Ti–6Al–4V modified by ultrasonic shot peeningMaterials & Design, 2016
- Fatigue strength of a Ti–6Al–4V alloy produced by selective laser meltingRussian Metallurgy (Metally), 2016
- Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layerJournal of Alloys and Compounds, 2016
- Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc methodApplied Surface Science, 2013
- Attributes, characteristics, and applications of titanium and its alloysJOM, 2010